Dell Unity: How to Remove an Existing LUN from a Consistency Group
Summary: Here are the steps and precautions that are necessary for removing an existing LUN from a Consistency Group. (User Correctable)
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
NOTE: Host access must be removed from a LUN before removing the LUN from a Consistency Groups (CG).
Step 1: On the Navigation Pane, under STORAGE, select Block.
Step 2: On the next page, select the Consistency Groups tab.
Step 3: Next, select the CG and click the pencil icon to open the Properties window of the CG.
Step 4: Open the LUNs tab in the CG properties window, and select the LUN or LUNs to be removed from the CG. Click the More Actions dropdown, and select Remove from Group.
The LUN should be successfully removed.
Affected Products
Dell EMC Unity, Dell EMC Unity Family |Dell EMC Unity All Flash, Dell EMC Unity Family, Dell EMC Unity HybridArticle Properties
Article Number: 000202482
Article Type: How To
Last Modified: 13 Nov 2024
Version: 10
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.