Cisco Nexus 5000 Series NX-OS: How to clear the Link Aggregation Control Protocol counters in Cisco Nexus 5000 Series NX-OS
Summary: Cisco Nexus 5000 Series NX-OS Layer 2 commands to clear and verify counters errors in a LACP.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
Goals
Cisco Nexus 5000 Series NX-OS Layer 2 commands to clear and verify counters errors in a LACP.
Facts
Solution
From EXEC mode:
clear lacp counters [ interface port-channel channel-num ]
Syntax Description
interface (Optional): Clears the LACP counters of a specific interface.
port-channel channel-num (Optional): Specifies a port channel interface. The range is from 1 to 4096
Examples:
This example shows how to clear all LACP counters:
switch# clear lacp counters
This example shows how to clear the LACP on a port channel:
switch# clear lacp counters interface port-channel 100
Additional Information
| VCE System | All |
| Component | Nexus |
Products
Connectrix, Cisco Nexus B22Dell Blade Fabric ExtenderArticle Properties
Article Number: 000207249
Article Type: How To
Last Modified: 18 Apr 2023
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.