PowerPath for AIX: PowerPathがデバイスへのパスの1つを構成しないため、PVIDが重複する
Summary: PowerPathがパスをピックアップしない理由はさまざまですが、最も一般的な理由は、hdiskと仮想デバイスの間の「reserve_policy」不一致です。ただし、PowerPathは擬似デバイスに適用する必要があるreserve_policyを認識していないため、擬似デバイスは「定義」されたままになります。ここでは、hdiskpowerと残りのhdiskの両方 が使用可能であり、その結果、重複したPVIDの問題が発生します(仮想デバイス上の同じPVIDは残りのhdisk上の問題と同じです)。 ...
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Dell EMC SW: PowerPath for AIX(任意のリリース)
OSによって構成されたデバイスへのパスは2つありますが、PowerPathにはパスの1つが欠落しています。その結果、PVIDは構成されていないhdiskと仮想デバイス上に残ります。
e.g, # powermt display dev=1 Pseudo name=hdiskpower1 Symmetrix ID=00029780XXXX Logical device ID=00157 Device WWN=6000097000029780XXXX533030313537 state=alive; policy=SymmOpt; queued-IOs=0 ============================================================================== --------------- Host --------------- - Stor - -- I/O Path -- -- Stats --- ### HW Path I/O Paths Interf. Mode State Q-IOs Errors ============================================================================== 5 fscsi6 hdisk233 FA 2d:08 active alive 0 0 # lspv ... hdisk1 00c94fa75919388d myvg1 ... hdiskpower1 00c94fa75919388d myvg1
Cause
プロセス(識別できない)がhdiskを保持しているため、PowerPathがデバイスを構成できません。
Resolution
「powermt manage dev=hdiskXX」を使用して、PowerPathによる残りのhdiskの管理を強制します。「powermt manage」は「Warning: management of the path hdiskXX will be configured on reboot」を返し、ディスクがビジー状態であり、これが問題の原因であることを証明します。再起動時に、ディスクは実際にPowerPathの制御下に入ります。
Affected Products
PowerPath for AIXArticle Properties
Article Number: 000215028
Article Type: Solution
Last Modified: 03 Jul 2024
Version: 5
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.