Secure Connect Gateway: How to change the DNS IPs in the SCG appliance
Summary: This article explains how to change the DNS configurations in the SCG.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
To change the DNS in the SCG, access the CLI of the SCG using putty session and login as root. Follow the below instructions to proceed:
1 - Once logged in, run the command: yast
2 - Then navigate to System > Network Settings then press Enter.
3 - Press the Tab button on the keyboard once then use the left arrow button to go to Hostname/DNS.
4 - Once in the Hostname/DNS, press Tab to navigate to Name server 1 and Name server 2 then change them accordingly.
5 - When done, press Tab to navigate to OK then press Enter to apply.
1 - Once logged in, run the command: yast
2 - Then navigate to System > Network Settings then press Enter.
3 - Press the Tab button on the keyboard once then use the left arrow button to go to Hostname/DNS.
4 - Once in the Hostname/DNS, press Tab to navigate to Name server 1 and Name server 2 then change them accordingly.
5 - When done, press Tab to navigate to OK then press Enter to apply.
Affected Products
Secure Connect Gateway - Virtual EditionArticle Properties
Article Number: 000223913
Article Type: How To
Last Modified: 16 Jul 2024
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.