Dell Unity: How to create local users on a standalone NAS Server (User Correctable)
Summary: The administrator wants to manage Local Users and Groups on a standalone NAS Server.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
There are two options to manage local users and groups on a standalone NAS server. On the Windows domain controller, MMC or the cmdkey command can be used.
If using 'cmdkey' command, the NetBIOS name of the NAS server must be used.
Errors will occur if you attempt to connect using an IP address.
To add a user to a standalone NAS server:
If using 'cmdkey' command, the NetBIOS name of the NAS server must be used.
Errors will occur if you attempt to connect using an IP address.
To add a user to a standalone NAS server:
cmdkey /add:<standalone_NAS_server_NetBIOS_name> /user:<New_User> /pass:<yourpassword>
Affected Products
Dell EMC Unity FamilyArticle Properties
Article Number: 000224101
Article Type: How To
Last Modified: 25 Apr 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.