PowerScale F 系列节点缺少 mgmt-1 和 mgmt-2 接口

Summary: PowerScale OneFS 命令中不显示 1GbE 接口。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

部署 PowerScale F600、F900、F210 或 F710 节点时，1GbE （mgmt-1/mgmt-2） 接口不会显示在群集配置向导中。将节点添加到现有群集时，在 isi network interfaces 输出中不会显示 mgmt-1 和 mgmt-2 接口。

# isi network interfaces list
LNN  Name     Status     VLAN ID  Owners                  Owner Type  IP Addresses
-----------------------------------------------------------------------------------
1    25gige-1 Up         -        -                       -           -
1    25gige-2 No Carrier -        -                       -           -
-----------------------------------------------------------------------------------

群集上的 ifconfig 输出显示 bge0 和 bge1 接口。

# /sbin/ifconfig -a| grep flags
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
mce0: flags=40008863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,ISIINTERNAL> metric 0 mtu 9000
mce1: flags=40008863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,ISIINTERNAL> metric 0 mtu 1500
mce2: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
mce3: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

 

Cause

1GbE 接口已从 OneFS 配置中删除。

 

Resolution

请联系 戴尔技术支持，并引用此知识库文章。

 

Affected Products

PowerScale F210, PowerScale F600, PowerScale F710, PowerScale F900

Products

PowerScale F210
Article Properties
Article Number: 000225843
Article Type: Solution
Last Modified: 14 Jan 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.