PowerScale F 系列節點缺少 mgmt-1 和 mgmt-2 介面

Summary: PowerScale OneFS 命令中不會顯示 1GbE 介面。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

在部署 PowerScale F600、F900、F210 或 F710 節點時，叢集組態精靈中未顯示 1GbE （mgmt-1/mgmt-2） 介面。將節點新增至現有叢集時，無法在 isi 網路介面輸出中顯示 mgmt-1 和 mgmt-2 介面。

# isi network interfaces list
LNN  Name     Status     VLAN ID  Owners                  Owner Type  IP Addresses
-----------------------------------------------------------------------------------
1    25gige-1 Up         -        -                       -           -
1    25gige-2 No Carrier -        -                       -           -
-----------------------------------------------------------------------------------

叢集上的 ifconfig 輸出會顯示 bge0 和 bge1 介面。

# /sbin/ifconfig -a| grep flags
bge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
bge1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
mce0: flags=40008863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,ISIINTERNAL> metric 0 mtu 9000
mce1: flags=40008863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST,ISIINTERNAL> metric 0 mtu 1500
mce2: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
mce3: flags=8863<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
ue0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500

 

Cause

1GbE 介面已從 OneFS 組態中移除。

 

Resolution

請聯絡 Dell 技術支援，並引用此知識文章。

 

Affected Products

PowerScale F210, PowerScale F600, PowerScale F710, PowerScale F900

Products

PowerScale F210
Article Properties
Article Number: 000225843
Article Type: Solution
Last Modified: 14 Jan 2025
Version:  6
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.