Erreur lors de la configuration de l’application Dell Optimizer dans la séquence de tâches SCCM
Summary: Cet article fournit des informations sur une erreur liée au logiciel Dell Optimizer et au déploiement de System Center Configuration Manager (SCCM).
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
Erreur Dell Optimizer
Vous pouvez voir que vous avez reçu une erreur « Code 7 » lorsque vous essayez de déployer une application Dell Optimizer avec la séquence de tâches.
Cause
Cela est normal.
Resolution
Il fonctionne comme prévu, car un service doit s’initialiser dans le système d’exploitation. Dell Optimizer ne peut pas être déployé à l’aide d’une séquence de tâches, mais l’application peut être injectée dans le système d’exploitation de base (WIM du système d’exploitation).
Il est recommandé de déployer l’application une fois la séquence de tâches terminée.
Affected Products
Alienware, Dell All-in-One, Dell Pro All-in-One, Dell Pro Max Micro, Dell Pro Max Slim, Dell Pro Max Tower, Dell Pro Micro, Dell Pro Slim, Dell Pro Tower, Dell Slim, Dell Tower, Inspiron, OptiPlex, Vostro, XPS, G Series, G Series, Alienware
, Dell Plus, Dell Pro, Dell Pro Max, Dell Pro Plus, Dell Pro Premium, Inspiron, Latitude, Dell Pro Rugged, Vostro, XPS, Fixed Workstations, Mobile Workstations, Dell Pro Max Micro XE FCM2250, Dell Pro Max Slim XE FCS1250, Dell Pro Max Tower T2 XE FCT2250, Dell Pro Max 16 XE MC16250, Dell Pro Micro Plus XE QBM1250, Dell Pro Slim Plus XE5 QBS1250, Dell Pro Tower Plus XE5 QBT1250
...
Article Properties
Article Number: 000227659
Article Type: Solution
Last Modified: 19 May 2025
Version: 2
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.