Connectrix Cisco MDS：交换机直接连接到 CSSM 时无法安装信任代码

Summary: 拓扑 2：直接连接到 CSSM。 在这种类型的连接中，将直接建立通信，并从交换机到 CSSM 建立可信连接。 直接连接需要 CSSM 的网络可访问性。 交换机配置的传输类型为“Call Home”。

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

安装的信任代码显示“<none>”（无），并且无法在“Show license status”（显示许可证状态）下更新其状态，在“Show logging log”（显示日志记录日志）上显示任何错误。 
`show license status`
Utility: 
    Status: DISABLED

Smart Licensing using Policy:
    Status: ENABLED

Data Privacy: 
    Sending Hostname: yes 
    Callhome Hostname Privacy: DISABLED 
        Smart Licensing Hostname Privacy: DISABLED 
    Version Privacy: DISABLED 

Transport: 
    Type: Callhome
.
.
.
Trust Code installed: <none>  >> The trust code status shows none.

Cause

CSSM 无法访问，配置的传输类型为 CallHome。
使用以下命令检查 URL 是否完全配置如下： https://tools.cisco.com/its/service/oddce/services/DDCEService。

 show license status

 

Switch : san002
callhome
  email-contact <Company email ID>
  streetaddress <Site address>
  distribute
  destination-profile full_text
  destination-profile full_text format XML
  destination-profile full_text message-size 100000
  destination-profile test
  destination-profile test format XML
  destination-profile test message-level 5
  destination-profile xml transport-method http
  destination-profile xml message-level 2
  .
  .
  .
  destination-profile xml http https://tools.cisco.com/its/service/oddce/services/DDCEService > this URL configuraion should be present in callhome config.
  destination-profile test alert-group system
  transport email from <Company email ID>
  transport email reply-to <Company email ID>

Resolution

配置 URL 并检查使用 URL 更新的 call home 配置。 
switch# configure terminal
switch(config)# ip domain-lookup
switch(config)# ip domain-name cisco.com
switch(config)# ip name-server 171.70.xx.xx
switch(config)# callhome
switch(config-callhome)# dest xml trans http
switch(config-callhome)# dest xml email sl-sch-test@cisco.com
switch(config-callhome)# dest xml http https://tools.cisco.com/its/service/oddce/services/DDCEService
switch(config-callhome)# enable
switch(config-callhome)# commit*
switch(config-callhome)# exit
switch(config)# feature license smart
确保已启用 CallHome 分发器。否则，提交将失败。
配置 URL 后，使用以下命令安装信任代码：
在交换机上运行以下命令： 
switch# license smart trust idtoken id_token_value all
应从 CSSM 门户的 InventoryGeneral>选项卡下复制 Id 令牌。 
san002# show license status
Utility:
    Status: DISABLED
Smart Licensing using Policy:
    Status: ENABLED
Data Privacy:
    Sending Hostname: yes
    Callhome Hostname Privacy: DISABLED
        Smart Licensing Hostname Privacy: DISABLED
    Version Privacy: DISABLED
Transport:
    Type: Callhome
.
.
.
Trust Code installed: Sep  2 13:10:07 2024  UTC
    Active: PID: DS-C9706, SN: FXS24XXXXXX
        Sep  2 13:10:07 2024  UTC
    Standby: PID: DS-C9706, SN: FXS24XXXXXX
        Sep  2 13:10:07 2024  UTC

Additional Information

参考链接： https://www.cisco.com/c/en/us/td/docs/dcn/mds9000/sw/9x/configuration/licensing/cisco-mds-9000-nx-os-licensing-guide-9x/m-mds900-ssl.html#Cisco_Concept.dita_4879e553-bac5-4c52-800b-d84219951758

Products

Connectrix MDS-Series Firmware
Article Properties
Article Number: 000228278
Article Type: Solution
Last Modified: 16 Sept 2024
Version:  1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.