PowerFlex H730p/H740p 컨트롤러가 있는 PowerFlex 시스템에서 디바이스 경로를 검색하는 방법
Summary: H730p/H740p 컨트롤러가 있는 PERCCLI 서버 PowerFlex 시스템을 실행하는 Linux 기반, Windows 또는 ESXi에서 특정 VD(Virtual Drive)에 대한 OS 디바이스 경로를 검색합니다.
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
서버에 대한 루트 액세스 권한이 있는지 확인합니다.
단계
- 관리 서버에 로그인합니다.
- VD 정보를 표시합니다.
/opt/MegaRAID/perccli/perccli64 /c0/vall show
다음과 유사한 출력이 나타납니다.
출력에는 DG(Device Group) 및 관련 VD가 표시됩니다. - VD를 디바이스 경로와 일치시킵니다.
- 다음 명령을 실행합니다.
ls –l /dev/disk/by-path/
다음과 유사한 출력이 나타납니다.
- 명령 출력에서 다음 줄을 검색합니다.
pci-0000:02:00.0-scsi-0:2:X:0여기서 X는 VD에 할당된 번호입니다.
- 방금 찾은 줄에서 sd엑스 줄의 끝에.
VD의 디바이스 경로는 다음과 같습니다. /dev/sdX.
PowerFlex SDS에 디바이스를 추가할 때 이 경로를 사용합니다.
- 다음 명령을 실행합니다.
Additional Information
Affected Products
PowerFlex appliance Intelligent Catalog SoftwareProducts
PowerFlex rack, VxFlex Ready Nodes, PowerFlex Appliance, PowerFlex custom node, ScaleIO, PowerFlex appliance R650, PowerFlex appliance R6525, PowerFlex appliance R660, PowerFlex appliance R6625, Powerflex appliance R750, PowerFlex appliance R760
, PowerFlex appliance R7625, PowerFlex custom node, PowerFlex custom node R650, PowerFlex custom node R6525, PowerFlex custom node R660, PowerFlex custom node R6625, PowerFlex custom node R750, PowerFlex custom node R760, PowerFlex custom node R7625, PowerFlex rack connectivity, PowerFlex rack HW, PowerFlex rack RCM Software, PowerFlex Software, VxFlex Ready Node, VxFlex Ready Node R640, VxFlex Ready Node R740xd, PowerFlex appliance R640, PowerFlex appliance R740XD, PowerFlex appliance R7525, PowerFlex appliance R840, VxFlex Ready Node R840
...
Article Properties
Article Number: 000249346
Article Type: How To
Last Modified: 16 Nov 2024
Version: 1
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.