NVP vProxy: I backup delle VM su VMC vCenter non riescono dopo l'aggiornamento alla versione 4.4.0-4 "Enable Storage vMotion failed. Errore 3014"

Summary: I backup dell'immagine vCenter di VMware Cloud (VMC) non riescono dopo l'aggiornamento della versione di NetWorker alla versione 19.11.0.2 Build: 55 e l'aggiornamento del proxy alla versione 4.4.0-4 ...

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

I backup delle immagini avevano esito negativo con errore dopo l'aggiornamento di vProxy alla versione 4.4.0-4 su VMware Cloud (VMC) vCenter.
Il registro della sessione di backup delle VM include:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_EndAccess: Enabled Storage VMotion failed. Error 3014 (Insufficient permissions in the host operating system) (No permission to perform this action.) at 6102.
...
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to open source VMDK '[DATASTORE_NAME] 3c8e5a63-4e85-2046-0477-026956739693/VM_NAME.vmdk': VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to backup virtual disk "Hard disk 1".
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Backup has FAILED.

Il file /opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-vddk.log di vProxy include:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Open a disk.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO warning -[19943] [Originator@6876 sub=Libs] [NFC ERROR]NfcNewAuthdConnectionEx: Failed to connect: Failed to connect to server <ESXi hostname/IP>:902
..
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: There is no avaiable transport mode when attempting to open disk. Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902. at 6502.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Cannot open disk [Datastore-name] <VM-name>/<VMDK_name>.vmdk. Error 13 (You do not have access rights to this file) (Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902.) at 7072.

    Cause

    Il seguente file di configurazione del vProxy (/opt/emc/vproxy/conf/VixDiskLib.config) conteneva voci duplicate.

    VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd # cat /opt/emc/vproxy/conf/VixDiskLib.config
vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd #

    Resolution

    1. Connettersi all'appliance vProxy tramite SSH, accedere come amministratore.
    2. Passare a root:

    sudo su -

    3. Modificare il file VixDiskLib.config in modo che non contenga righe vixDiskLib.phoneHome duplicate:

    vi /opt/emc/vproxy/conf/VixDiskLib.config
    Esempio: 
    vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
    4. Salvare il file.
    5. Riavviare il servizio vbackupd. 
    systemctl daemon-reload
systemctl restart vbackupd.service
    NOTA: Facoltativamente, invece di riavviare i servizi, è possibile riavviare la VM vProxy. Il riavvio della VM vProxy ricarica le modifiche nel file VixDiskLib.config durante l'avvio del servizio vbackupd.

    Affected Products

    NetWorker

    Products

    NetWorker Family
    Article Properties
    Article Number: 000255608
    Article Type: Solution
    Last Modified: 09 Dec 2024
    Version:  2
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.