NVP vProxy: VM-back-ups op VMC vCenter mislukken na upgrade naar 4.4.0-4 "Storage inschakelen vMotion failed. Fout 3014"

Summary: Back-ups van VMware Cloud (VMC) vCenter-images mislukken na upgrade van NetWorker-versie naar 19.11.0.2 Build: 55 en proxy-upgrade naar 4.4.0-4

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

Imageback-ups mislukten met een fout na vProxy-upgrade naar 4.4.0-4 op VMware Cloud (VMC) vCenter.
Het VM-back-upsessielogboek bevat:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_EndAccess: Enabled Storage VMotion failed. Error 3014 (Insufficient permissions in the host operating system) (No permission to perform this action.) at 6102.
...
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to open source VMDK '[DATASTORE_NAME] 3c8e5a63-4e85-2046-0477-026956739693/VM_NAME.vmdk': VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to backup virtual disk "Hard disk 1".
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Backup has FAILED.

De /opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-vddk.log van de vProxy omvat:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Open a disk.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO warning -[19943] [Originator@6876 sub=Libs] [NFC ERROR]NfcNewAuthdConnectionEx: Failed to connect: Failed to connect to server <ESXi hostname/IP>:902
..
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: There is no avaiable transport mode when attempting to open disk. Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902. at 6502.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Cannot open disk [Datastore-name] <VM-name>/<VMDK_name>.vmdk. Error 13 (You do not have access rights to this file) (Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902.) at 7072.

    Cause

    Het volgende vProxy-configuratiebestand (/opt/emc/vproxy/conf/VixDiskLib.config) bevatte dubbele vermeldingen.

    VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd # cat /opt/emc/vproxy/conf/VixDiskLib.config
vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd #

    Resolution

    1. Maak verbinding met de vProxy appliance via SSH, meld u aan als beheerder.
    2. Overschakelen naar root:

    sudo su -

    3. Bewerk het bestand VixDiskLib.config zodat het geen dubbele vixDiskLib.phoneHome-regels bevat:

    vi /opt/emc/vproxy/conf/VixDiskLib.config
    Voorbeeld: 
    vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
    4. Sla het bestand op.
    5. Start de vbackup-service opnieuw. 
    systemctl daemon-reload
systemctl restart vbackupd.service
    OPMERKING: Optioneel kan de vProxy VM opnieuw worden opgestart in plaats van de services opnieuw op te starten. Als u de vProxy VM opnieuw opstart, worden de wijzigingen in het bestand VixDiskLib.config opnieuw geladen tijdens het opstarten van de vbackupd-service.

    Affected Products

    NetWorker

    Products

    NetWorker Family
    Article Properties
    Article Number: 000255608
    Article Type: Solution
    Last Modified: 09 Dec 2024
    Version:  2
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.