NVP vProxy: 4.4.0-4 e yükselttikten sonra VMC vCenter'daki VM yedeklemeleri başarısız oluyor Enable Storage vMotion failed. Error 3014"

Summary: NetWorker sürümü 19.11.0.2 Derlemesine yükseltildikten sonra VMware Cloud (VMC) vCenter görüntü yedeklemeleri başarısız oluyor: 55 ve proxy 4.4.0-4 e yükseltme

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Symptoms

VMware Cloud (VMC) vCenter da vProxy 4.4.0-4 e yükseltildikten sonra Görüntü Yedeklemeleri Hata vererek başarısız oluyordu.
VM yedekleme oturumu günlüğü şunları içerir:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_EndAccess: Enabled Storage VMotion failed. Error 3014 (Insufficient permissions in the host operating system) (No permission to perform this action.) at 6102.
...
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to open source VMDK '[DATASTORE_NAME] 3c8e5a63-4e85-2046-0477-026956739693/VM_NAME.vmdk': VDDK Error: 13: You do not have access rights to this file.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to initialize Block Reader.
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Failed to backup virtual disk "Hard disk 1".
YYYY-MM-DDTHH:MM:SSZ ERROR:  [@(#) Build number: 55] c0a8f9d0-2604-4747-b4b8-588a4bbfe205-vcenter.sddc-54-247-108-146.VCENTER_NAME:VM_MOREF: Backup has FAILED.

/opt/emc/vproxy/runtime/logs/vbackupd/vbackupd-vddk.log içinde /opt/emc/vproxy/runtime/logs/vbackupd/ şunları içerir:

YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Open a disk.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO warning -[19943] [Originator@6876 sub=Libs] [NFC ERROR]NfcNewAuthdConnectionEx: Failed to connect: Failed to connect to server <ESXi hostname/IP>:902
..
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: There is no avaiable transport mode when attempting to open disk. Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902. at 6502.
YYYY-MM-DDTHH:MM:SSZ NOTICE: VDDK INFO VixDiskLib: VixDiskLib_OpenEx: Cannot open disk [Datastore-name] <VM-name>/<VMDK_name>.vmdk. Error 13 (You do not have access rights to this file) (Mounting 42197eae-c679-dd06-8bbb-418e49607575 using transport hotadd failed : Could not connect to ESX host <ESXi hostname/IP>: Failed to connect to server <ESXi hostname/IP>:902.) at 7072.

    Cause

    Aşağıdaki vProxy yapılandırma dosyası (/opt/emc/vproxy/conf/VixDiskLib.config) yinelenen girişler içeriyordu.

    VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd # cat /opt/emc/vproxy/conf/VixDiskLib.config
vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
VPROXY_HOSTNAME:/opt/emc/vproxy/runtime/logs/vbackupd #

    Resolution

    1. vProxy cihazına SSH üzerinden bağlanın, yönetici olarak oturum açın.
    2. Kök kullanıcıya geçin:

    sudo su -

    3. VixDiskLib.config dosyasını, yinelenen vixDiskLib.phoneHome satırları olmayacak şekilde düzenleyin:

    vi /opt/emc/vproxy/conf/VixDiskLib.config
    Example: 
    vixDiskLib.transport.LogLevel = "3"
vixDiskLib.transport.san.DisableVmCheck=0
vixDiskLib.transport.hotadd.NoNfcSession = 1
vixDiskLib.phoneHome.EnablePhoneHome = 1
vixDiskLib.phoneHome.ProductName = "Dell EMC vProxy"
vixDiskLib.phoneHome.ProductVersion = "4.4.0-4_1-1"
    4. Dosyayı kaydedin.
    5. Vbackupd hizmetini yeniden başlatın. 
    systemctl daemon-reload
systemctl restart vbackupd.service
    NOT: İsteğe bağlı olarak, hizmetleri yeniden başlatmak yerine vProxy VM yeniden başlatılabilir. vProxy sanal makinesinin yeniden başlatılması, vbackupd hizmetinin başlatılması sırasında VixDiskLib.config dosyasındaki değişiklikleri yeniden yükler.

    Affected Products

    NetWorker

    Products

    NetWorker Family
    Article Properties
    Article Number: 000255608
    Article Type: Solution
    Last Modified: 09 Dec 2024
    Version:  2
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.