PowerFlex 4.x Upgrade guide 3.6 to 4.5 Video

Summary: Use this procedure to upgrade both the PowerFlex software and the PowerFlex nodes. Perform the storage software upgrade first.

This article applies to This article does not apply to This article is not tied to any specific product. Not all product versions are identified in this article.
Check out other resources

Instructions

Note: PowerFlex 3.6 is going End of Support on 30 June 2025; accordingly, customers who are still on 3.6 must plan for an upgrade to 4.X code as soon as possible 

 

 

 

Depending on your environment, follow the recommended workflow in the following diagram:

Upgrade workflowUpgrade workflow

     

    PowerFlex Upgrade Guide from 3.6.2 to 4.5

    Duration: 00:00:00 (hh:mm:ss)
    When available, closed caption (subtitles) language settings can be chosen using the CC icon on this video player.

    Additional Information

     
    • For more Videos See 

    Affected Products

    ScaleIO
    Article Properties
    Article Number: 000323127
    Article Type: How To
    Last Modified: 29 May 2025
    Version:  1
    Find answers to your questions from other Dell users
    Support Services
    Check if your device is covered by Support Services.