PowerStore 500T: ノード交換後にノードがダウンしている
Summary: PowerStore 500Tノードの交換後、ノードが完全にバックアップされない場合があります。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Symptoms
PowerStore 500Tでノードを交換した後、完全に起動しない場合があります。
PowerStore Managerのユーザー インターフェイスでは、ノードが正常な状態ではないと表示される場合があります。
PowerStore Managerのユーザー インターフェイスでは、ノードが正常な状態ではないと表示される場合があります。
Cause
これは、ノード内の内部M.2起動モジュールの初期化プロセスに関連するソフトウェアの問題が原因で発生する可能性があります。
Resolution
対策
ノードを通常の状態にリストアするには、Dellテクニカル サポートに連絡し、このナレッジベース記事IDを伝えてください。修正
PowerStoreOS 2.0.1.3以降には、この問題の修正が含まれています。Additional Information
PowerStoreOS V2では、PowerStore 500Tノードは顧客交換可能ユニット(CRU)ではないため、交換についてはテクニカル サポートに連絡する必要があります。
Affected Products
PowerStore 500TProducts
PowerStoreArticle Properties
Article Number: 000187995
Article Type: Solution
Last Modified: 13 Jun 2025
Version: 11
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.