Dell Networking SONiC:链路层发现协议
Summary: 本文介绍 Dell Networking SONiC 中的链路层发现协议 (LLDP) 和配置。本文使用运行 Dell SONiC 4.1 的交换机。
This article applies to
This article does not apply to
This article is not tied to any specific product.
Not all product versions are identified in this article.
Instructions
|
前提条件
我们使用标准接口命名来演示概念。请参阅文章 202172 Dell Networking S 系列:基本接口配置 - SONiC 4.0,了解有关接口命名的更多信息 |
指数
介绍
配置语法
启用和禁用 LLDP。
配置 LLDP 传输
配置 LLDP 接收
启用 LLDP 传输和接收。
启用 LLDP 以发送管理地址、系统名称和说明。
验证
简介
链路层发现协议 (LLDP) 允许交换机通告主要功能和物理描述。LLDP 在 IEEE 802.1AB 中定义。此信息可用于帮助识别系统拓扑和检测 LAN 上的不良配置。
- LLDP 是一种单向协议;没有请求或响应序列。实施传输功能的站点通告信息,实施接收功能的站点接收和处理信息。
- 可在每个交换机端口上单独启用或禁用传输和接收功能。
- LLDP 是一种不限供应商的发现协议。
- 交换机接收并定期传输 LLDP 协议数据单元 (PDU)。默认传输间隔为 30 秒。
- 从邻居收到的 LLDP PDU 信息将在特定时间(称为生存时间 (TTL) 后过期。默认 TTL 值为 120 秒。
- 生成树阻塞端口允许 LLDP PDU。
配置语法
提醒:LLDP 配置发生任何更改后,LLDP 表将在 120 秒 (TTL) 内更新。
启用和禁用 LLDP。
Enable LLDP Globally admin@DELLSONiC:~$ sonic-cli DELLSONiC# configure DELLSONiC(config)# lldp enable DELLSONiC(config)# end Disable LLDP Globally DELLSONiC# configure DELLSONiC(config)# no lldp enable DELLSONiC(config)# end Enable LLDP on a single interface DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-EthX/X)# lldp enable DELLSONiC(config-if-EthX/X)# end Disable LLDP on a single interface DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-EthX/X)# no lldp enable DELLSONiC(config-if-EthX/X)# end |
配置 LLDP 传输
执行这些命令将禁用 LLDP 接收。 Enable LLDP Transmit Globally admin@DELLSONiC:~$ sonic-cli DELLSONiC# configure DELLSONiC(config)# lldp transmit DELLSONiC(config)# end Enable LLDP Transmit on a single interface DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-EthX/X)# lldp transmit DELLSONiC(config-if-EthX/X)# end Enable LLDP Transmit and Receive (Click here) |
配置 LLDP 接收
执行这些命令将禁用 LLDP 传输。 Enable LLDP Receive Globally admin@DELLSONiC:~$ sonic-cli DELLSONiC# configure DELLSONiC(config)# lldp receive DELLSONiC(config)# end Enable LLDP Receive on a single interface DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-EthX/X)# lldp receive DELLSONiC(config-if-EthX/X)# end Enable LLDP Transmit and Receive (Click here) |
启用 LLDP 传输和接收。
默认情况下,LLDP 传输和接收默认已启用。如果您已配置 LLDP 传输,LLDP 接收将停用。
如果您已配置 LLDP 接收,则 LLDP 传输将停用。
要激活两者,请删除 LLDP 接收和 LLDP 传输。
Enable LLDP Transmit and Receive Globally admin@DELLSONiC:~$ sonic-cli DELLSONiC# configure DELLSONiC(config)# no lldp receive DELLSONiC(config)# no lldp transmit DELLSONiC(config)# end Enable LLDP Transmit and Receive on a single interface DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-EthX/X)# no lldp receive DELLSONiC(config-if-EthX/X)# no lldp transmit DELLSONiC(config-if-EthX/X)# end |
启用 LLDP 以发送管理地址、系统名称和说明。
默认情况下,LLDP 会通告系统名称 和系统描述。要通过 LLDP 通告管理地址,我们必须手动配置 lldp tlv-select management-address 。
Use bellow configuration to enable system-name, system-description and management-address DELLSONiC# configure DELLSONiC(config)# lldp system-name DELLSONiC(config)# lldp system-description DELLSONiC(config)# lldp tlv-select management-address DELLSONiC(config)#end Disable system-name, system-description and management-address DELLSONiC# configure DELLSONiC(config)# no lldp system-name DELLSONiC(config)# no lldp system-description DELLSONiC(config)# no lldp tlv-select management-address DELLSONiC(config)#end |
You have an option to manually specify the IPv4/IPv6 address of management address manually DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-Eth1/1)# lldp tlv-set management-addressDELLSONiC(config-if-Eth1/1)# end *Applying this command will make Switch to send LLDP in the specific interface with configured IPV4/IPV6 address, rather than management port IP address. To disable use DELLSONiC# configure DELLSONiC(config)# interface Eth slot/port[/subport] DELLSONiC(config-if-Eth1/1)# lldp tlv-set management-address DELLSONiC(config-if-Eth1/1)# end |
验证
| 配置 | 语法 |
| DELLSONiC# show lldp 表 | 显示所有 LLDP 邻居的夏季。 |
| DELLSONiC# show lldp 邻居 | 显示所有 LLDP 邻居的详细信息。 |
| DELLSONiC# show lldp neighbor Eth slot/port[/subport] | 在特定接口中显示 LLDP 邻居的详细信息。 |
| DELLSONiC# 显示 lldp 统计信息 | 显示所有 LLDP 邻居的 LLDP 统计信息。 |
| DELLSONiC# show lldp statistics Eth slot/port[/subport] | 在特定接口中显示 LLDP 统计信息。 |
输出示例
DELLSONiC# show lldp table ------------------------------------------------------------------------------------------------------ LocalPort RemoteDevice RemotePortID Capability RemotePortDescr ------------------------------------------------------------------------------------------------------- Eth1/1 DELL-EDGE-sonic Eth1/1 R Ethernet0 |
DELLSONiC# show lldp neighbor Eth 1/1
-----------------------------------------------------------
LLDP Neighbors
-----------------------------------------------------------
Interface: Eth1/1,via: LLDP
Chassis:
ChassisID: XXXXXXXXXXXXXXXXXXXXXXXX
SysName: DELL-EDGE-sonic
SysDescr: DELL-CORE
TTL: 120
MgmtIP: 30.0.0.1
Capability: ROUTER, ON
Port
PortID: Eth1/1
PortDescr: Ethernet0
LLDP-MED
Device Type: Network Connectivity Device
Capability: Capabilities, yes
Capability: Ext_mdi_power_pd, yes
Capability: Inventory, yes
Capability: Network_policy, yes
Inventory
Hardware Rev: XXXXXXXXXXXXXXXXXXXXXXXX
Software Rev: XXXXXXXXXXXXXXXXXXXXXXXX
Firmware Rev: XXXXXXXXXXXXXXXXXXXXXXXX
Serial Number: |
DELLSONiC# show lldp statistics Eth 1/1
LLDP Statistics
---------------------------------
Interface: Eth1/1
Transmitted : 60
Received : 45
Discarded : 0
Unrecognized TLV : 0
Ageout : 1
--------------------------------- |
Affected Products
Enterprise SONiC Distribution, PowerSwitch E3200-ON Series, Dell EMC Networking N3200-ON, PowerSwitch S5212F-ON, PowerSwitch S5224F-ON, PowerSwitch S5232F-ON, PowerSwitch S5248F-ON, PowerSwitch S5296F-ON, PowerSwitch Z9100-ON, PowerSwitch Z9264F-ON
, PowerSwitch Z9332F-ON, PowerSwitch Z9432F-ON
...
Article Properties
Article Number: 000218154
Article Type: How To
Last Modified: 16 Oct 2023
Version: 4
Find answers to your questions from other Dell users
Support Services
Check if your device is covered by Support Services.