Connectrix B-Series Firmware: FOS user authentication works but has no permissions when configuring authentication
Yhteenveto: While configuring the Brocade switch for tacacs+ user authentication. User is then pointing to a tacacs+ server application called tacacs.net. User authentication passes but user is unable to run any commands. ...
Tämä artikkeli koskee tuotetta
Tämä artikkeli ei koske tuotetta
Tämä artikkeli ei liity tiettyyn tuotteeseen.
Tässä artikkelissa ei yksilöidä kaikkia tuoteversioita.
Ohjeet
Symptom: User logs in correctly but has no user permissions to run any commands.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Root Cause: tacacs.net application does not have the concept of Brocade SAN switch user roles which are needed to configure user roles such as admin role, etc. tacacs.net server is a proxy to a back-end LDAP server but the application is unable to "see" the user roles defined on the switch since ldapcfg --maprole cannot be used for tacacs+ configuration.
Workaround: User can use locally-defined user accounts or use LDAP protocol directly.
Resolution: Customer using non-support/non-tested tacacs.net app. Not a Brocade issue.
Tuotteet, joihin vaikutus kohdistuu
ConnectrixTuotteet
Connectrix B-Series HardwareArtikkelin ominaisuudet
Artikkelin numero: 000022769
Artikkelin tyyppi: How To
Viimeksi muutettu: 07 tammik. 2026
Versio: 4
Etsi vastauksia kysymyksiisi muilta Dell-käyttäjiltä
Tukipalvelut
Tarkista, kuuluuko laitteesi tukipalveluiden piiriin.