VNX/Unity: Cinder driver requires storops with Red Hat OpenStack Platform 10 (User Correctable)

Résumé: OpenStack Cinder Driver for Block requires Storops package for RED HAT 10.

Cet article concerne Cet article ne concerne pas Cet article n’est associé à aucun produit spécifique. Toutes les versions du produit ne sont pas identifiées dans cet article.
Consulter d’autres ressources

Symptômes

Implementing OpenStack Cinder in RedHat Enterprise 10 Environment.

Using the VNX Cinder Driver with Red Hat OpenStack Platform 10 results in "Failed to initialize driver" errors.

Cause

With Red Hat OpenStack Platform 10, the Dell EMC storops (https://github.com/emc-openstack/storops) library must be installed on each host utilizing the VNX Cinder Driver. Storops is created and maintained by Dell EMC and is a Python library used to send commands to the VNX system. The storops library is not included in a basic installation of Red Hat OpenStack Platform 10.

Résolution

Install storops on each OpenStack host that is using the VNX Cinder driver.

Refer to the latest release with the "noarch" package from this location: https://github.com/emc-openstack/storops/releases.
 
Alternatively, the pip package manager may be used (ex. "pip install storops"). See the Dell EMC GitHub page for more details on installing storops: https://github.com/emc-openstack/storops

Informations supplémentaires

Red Hat is also aware of this new dependency.
Details can be found on Red Hat's support site: https://access.redhat.com/solutions/2888591

 

Produits concernés

VNX/VNXe

Produits

Dell EMC Unity Family, VNX/VNXe
Propriétés de l’article
Numéro d’article: 000065199
Type d’article: Solution
Dernière modification: 18 avr. 2026
Version:  5
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.