VNX/Unity: Cinder 드라이버에는 Red Hat OpenStack Platform 10을 사용하는 storops가 필요합니다(사용자 수정 가능).
Résumé: OpenStack Cinder Driver for Block에는 RED HAT 10용 Storops 패키지가 필요합니다.
Cet article concerne
Cet article ne concerne pas
Cet article n’est associé à aucun produit spécifique.
Toutes les versions du produit ne sont pas identifiées dans cet article.
Symptômes
RedHat Enterprise 10 환경에서 OpenStack Cinder를 구현합니다.
Red Hat OpenStack Platform 10에서 VNX Cinder 드라이버를 사용하면 "드라이버 초기화 실패" 오류가 발생합니다.
Red Hat OpenStack Platform 10에서 VNX Cinder 드라이버를 사용하면 "드라이버 초기화 실패" 오류가 발생합니다.
Cause
Red Hat OpenStack 플랫폼 10에서는 VNX Cinder 드라이버를 사용하여 각 호스트에 Dell EMC storops(https://github.com/emc-openstack/storops) 라이브러리를 설치해야 합니다. Storops는 Dell EMC에서 생성 및 유지 관리하며 VNX 시스템에 명령을 전송하는 데 사용되는 Python 라이브러리입니다. storops 라이브러리는 Red Hat OpenStack Platform 10의 기본 설치에 포함되어 있지 않습니다.
Résolution
VNX Cinder 드라이버를 사용하는 각 OpenStack 호스트에 storops를 설치합니다.
https://github.com/emc-openstack/storops/releases 위치에서 "noarch" 패키지가 있는 최신 릴리스를 참조하십시오.
또는 pip 패키지 관리자를 사용할 수 있습니다(예: "pip install storops")를 실행합니다. storops 설치에 대한 자세한 내용은 Dell EMC GitHub 페이지를 참조하십시오. https://github.com/emc-openstack/storops
https://github.com/emc-openstack/storops/releases 위치에서 "noarch" 패키지가 있는 최신 릴리스를 참조하십시오.
또는 pip 패키지 관리자를 사용할 수 있습니다(예: "pip install storops")를 실행합니다. storops 설치에 대한 자세한 내용은 Dell EMC GitHub 페이지를 참조하십시오. https://github.com/emc-openstack/storops
Informations supplémentaires
Red Hat도 이 새로운 종속성을 알고 있습니다.
자세한 내용은 Red Hat의 지원 사이트에서 확인할 수 있습니다 https://access.redhat.com/solutions/2888591
Produits concernés
VNX/VNXeProduits
Dell EMC Unity Family, VNX/VNXePropriétés de l’article
Numéro d’article: 000065199
Type d’article: Solution
Dernière modification: 18 avr. 2026
Version: 5
Trouvez des réponses à vos questions auprès d’autres utilisateurs Dell
Services de support
Vérifiez si votre appareil est couvert par les services de support.