VPLEX: How to reduce Java's high CPU utilization on the management server.

Riepilogo: This article walks through the process of lowering the Java's high CPU utilization percentage. This can be done by restarting the management console.

Questo articolo si applica a Questo articolo non si applica a Questo articolo non è legato a un prodotto specifico. Non tutte le versioni del prodotto sono identificate in questo articolo.

Sintomi

Restart the Management Station console from the management server using the command;
sudo /etc/init.d/VPlexManagementConsole restart

Checking the VPLEX management server Java utilization shows that it is consuming over 100%.

service@#########:~> top
top - 14:45:38 up 993 days, 3:16, 4 users, load average: 1.37, 1.43, 1.47
Tasks: 137 total, 2 running, 135 sleeping, 0 stopped, 0 zombie
Cpu(s): 50.9%us, 0.3%sy, 0.0%ni, 48.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
Mem: 3920420k total, 3361876k used, 558544k free, 26616k buffers
Swap: 8388604k total, 3750660k used, 4637944k free, 350828k cached

PID   USER     PR NI VIRT  RES  SHR  S %CPU %MEM TIME+    COMMAND
11316 service  25 5  6902m 2.7g 9868 S 101  71.4 47236:56 java

Causa

This can be seen in environments that have been up for extended periods of time. In these situations, the services running on the management server can start to consume too many resources.

Risoluzione

Before restarting any management console or management server, ensure that there are no ongoing migrations (device or extent)

Run the below commands on the Management Station console:

Step 1: Verify the management server console's pid:

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole status
VPlexManagementConsole is running (pid 11315)


Step 2: Restarting of management server console: (to restart the Management Server software.)

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole restart
Restarting EMC VPlex Management Console... done


Step 3: Post restarting the management server software verify the pid:

Example:
service@#########:~> sudo /etc/init.d/VPlexManagementConsole status
VPlexManagementConsole is running (pid 23533)



Check if the issue is resolved after the restart.

service@#########:~> top
top -      15:05:08 up 993 days, 3:36, 5 users, load average: 1.72, 1.57, 1.52
Tasks:     144 total,     2 running,         142 sleeping,       0 stopped,     0 zombie
Cpu(s):    36.8%us,       2.0%sy, 0.0%ni, 45.3%id, 15.7%wa, 0.0%hi, 0.2%si, 0.0%st
Mem:       3920420k       total,     1446552k       used, 2473868k free, 27192k buffers
Swap:      8388604k       total,     81112k         used, 8307492k free, 484428k cached


PID   USER     PR  NI  VIRT  RES  SHR  S %CPU %MEM  TIME+    COMMAND
23534    service            20       0        2840m      1.2g     23m    S     6         33.0     22:57.52          java

Prodotti interessati

VPLEX Series

Prodotti

VPLEX for All Flash, VPLEX GeoSynchrony, VPLEX Series, VPLEX VS2, VPLEX VS6
Proprietà dell'articolo
Numero articolo: 000029009
Tipo di articolo: Solution
Ultima modifica: 09 gen 2026
Versione:  4
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.