NVP vProxy: VM backups failing with "no matching devices for save of client 'vCenter Name': check storage nodes, device, or pools"
Riepilogo: Virtual Machines protected by the NVP vProxy appliance fail to backup, the backup action log states "no matching devices for save of client 'vCenter Name': check storage nodes, device, or pools" ...
Questo articolo si applica a
Questo articolo non si applica a
Questo articolo non è legato a un prodotto specifico.
Non tutte le versioni del prodotto sono identificate in questo articolo.
Sintomi
- Virtual Machine backup fails soon after starting with the following error logged in the action log within the NetWorker management console:
DD/MM/YYYY HH:MM:SS Unable to process VM 'VM_NAME': no matching devices for save of client `VCENTER_NAME' check storage nodes, devices or pools DD/MM/YYYY HH:MM:SS VM_NAME: Backup failed
NOTE: This same error can appear for other backup types (File system, Database, and so on). The steps in this KB can be used to troubleshoot this issue.
Causa
This is not a vProxy issue. The failure is occurring during device selection. The workflow is unable to reconcile a usable device. Either there is a communication issue between the existing NetWorker server, Storage Node, and device or there is a potential configuration conflict.
Risoluzione
1. Log in to the NetWorker Management Console (NMC).
2. Go to Protection->Policies, and select the Workflow from the left menu.
3. Make note of the Pool and Storage Node configured in the workflow's backup action:
4. Go to Media->Media Pools and open the properties of the Pool that is used by the workflow.
5. In the Selection Criteria tab, make note of any devices with a checkmark. If there are any devices that are checked, this means that the pool is restricted to using only these devices.
NOTE: The device must be a Data Domain type device. For VMware protection using multiple devices in a single pool, each device must reside within the same Data Domain host.
6. Go to Devices->Devices and confirm that the devices that are checked in the selection criteria are mounted. A mounted device shows a volume label.
NOTE: If the Volume Name column is empty, the device is unmounted. Right-click the device and select Mount. Monitor the Log and Alerts window for any issues mounting the device.
7. Open the device properties and ensure that the "read only" box is cleared:
8. Go to Media->Disk Volumes, ensure that the volume is appendable.
9. Go to Devices->Storage Nodes and confirm that the storage node noted in step 3 is in a "ready" state:
NOTE: nsrserverhost is the NetWorker server's local storage node. Any devices that are shown with a rd= prefix mean that they are configured through a "remote" NetWorker storage node.
10. Go to Protection->Clients and open the client properties of the vCenter server's client resource.
11. In the Globals (2 of 2) tab, ensure that the storage node entries exist for the storage nodes that are used during VM backups of this vCenter. Multiple storage nodes can be listed, one entry per line.
NOTE: View->Diagnostic Mode must be enabled to see the Storage Nodes specifications in the client properties.
Informazioni aggiuntive
- NetWorker: Troubleshooting Media Waiting Events - waiting for 1 writable volume or no matching devices
- NetWorker: NVP vProxy: nsrvproxy_save failed to authenticate with nsrmmd on host xxxxxx
- NetWorker NVP-vProxy: Backups stop responding waiting for writable volumes if the target backup pool contains a read-only device
Prodotti interessati
NetWorkerProdotti
NetWorker FamilyProprietà dell'articolo
Numero articolo: 000200894
Tipo di articolo: Solution
Ultima modifica: 19 mar 2025
Versione: 2
Trova risposta alle tue domande dagli altri utenti Dell
Support Services
Verifica che il dispositivo sia coperto dai Servizi di supporto.