Dell Unity: How to Setup or Create Local Replication

Summary: How to setup or create local replication (User Correctable)

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Instructions

When creating local replication, there is no requirement to configure replication interfaces or connections.
  1. Double-click the block LUN that you want to create local replication.
  2. Click the Replication tab.
  3. Click the Configured Replication button.
  4. For Replication Mode, choose either Asynchronous or Manual (Synchronous cannot be used for local replication).
    • For Asynchronous mode, enter the RPO (how often to sync with the destination); default is every 60 minutes.
  5. For Replicate To, choose Local.
  6. Click Next.
  7. Enter the name that you want for the destination LUN.
  8. Choose which pool you want destination LUN to be in.
  9. Choose whether to use compression or not. Choose a tiering policy. Click Next.
  10. Verify the summary and click Finish.

Additional Information

Replication on datastores has to be done at the time of the datastore creation.

For file replication, create the replication on the NAS Server instead of the individual file systems. Creating replication on the NAS servers automatically creates matching replication sessions on each file system on that NAS server. Once replication finishes, file systems that are not wanted can be deleted.

Produse afectate

Dell EMC Unity Family

Produse

Dell EMC Unity Family
Proprietăți articol
Article Number: 000004422
Article Type: How To
Ultima modificare: 11 Dec 2025
Version:  7
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.