PowerEdge: XR4510C - iDRAC failed path does not fail over to remaining available LOM ports

Summary: Dell XR4510C customers may report the iDRAC failed path does not fail over to other Lan On Motherboard (LOM) ports as expected.

Acest articol se aplică pentru Acest articol nu se aplică pentru Acest articol nu este legat de un produs specific. Acest articol nu acoperă toate versiunile de produs existente.
Consultați alte resurse

Symptoms

The symptoms of this issue are as follows:

  • After enabling failover Network of iDRAC and setting the Intel LOM1 port as iDRAC port, the iDRAC failed path does not fail over to the remaining LOM ports (LOM 2/3/4).
  • The remaining LOM ports do not take over the failed path, and the user has to unplug and then plug the 25G cable of the port they want to take over.
  • The iDRAC connection recovers from disconnection and is taken over.

Cause

The UI is the primary cause of the issue, leading to the failure of the iDRAC to fail over to the remaining available LOM ports.

Resolution

  • Do not replace hardware.
  • Update the firmware
  • Initiate failover from switch port.

Verification

To verify that the issue has been successfully resolved, check the iDRAC connection after initiating failover from the switch port.

Produse afectate

Intel PRO Family of Adapters, OEMR XR4510c, PowerEdge XR4510c
Proprietăți articol
Article Number: 000208220
Article Type: Solution
Ultima modificare: 15 Oct 2025
Version:  4
Găsiți răspunsuri la întrebările dvs. de la alți utilizatori Dell
Servicii de asistență
Verificați dacă dispozitivul dvs. este acoperit de serviciile de asistență.