PowerScale: SyncIQ Traffic Flowing Through Non-Replication Pool

Zhrnutie: Replication traffic flows through nonreplication pool when the flags "Force Interface=No" and "Restrict Target Network=No" are not set,

Tento článok sa vzťahuje na Tento článok sa nevzťahuje na Tento článok nie je viazaný na žiadny konkrétny produkt. V tomto článku nie sú uvedené všetky verzie produktov.
Pozrite si ďalšie zdroje

Symptómy

When the following flags are not set, replication traffic flows through nonreplication pool in some instances causing congestion and performance issues. 
Force Interface: No
Restrict Target Network: No 

Príčina

By default, default route on the routing table is used to determine the interface which traffic ORIGINATEs from.

When the two flags "Force Interface" and "Restrict Target Network" are not set, a routing table is used and traffic is seen on a nonreplication network pool.

Riešenie

ACTION PLAN:
  1. Identify the policy to be modified and review whether the options are set correctly.
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
Example: 
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Target:|Subnet|Pool|Force|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: No
              Restrict Target Network: No
  1. Set the flags to restrict traffic to the correct source and target networks and verify the change.
# isi sync policies modify test --force-interface=yes --restrict-target-network=yes
# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'

Example:

Isilon02-3# isi sync policies modify test --force_interface=yes --restrict-target-network=yes
Isilon02-3# isi sync policies view --policy=test | egrep 'Name:|Subnet|Pool|Force|Target:|Restrict'
                                 Name: test
                               Target: target1.local
                        Source Subnet: Subnet1
                          Source Pool: Replication
                      Force Interface: Yes
              Restrict Target Network: Yes

Dotknuté produkty

Isilon

Produkty

Isilon, Isilon SyncIQ
Vlastnosti článku
Číslo článku: 000161139
Typ článku: Solution
Dátum poslednej úpravy: 17 dec 2025
Verzia:  5
Nájdite odpovede na svoje otázky od ostatných používateľov spoločnosti Dell
Služby podpory
Skontrolujte, či sa na vaše zariadenie vzťahujú služby podpory.