Cannot uninstall PowerPath on Sun Solaris host error = device is busy
摘要: Cannot uninstall PowerPath on Sun Solaris host error = device is busy
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
pkgrm EMCpower
Cannot uninstall PowerPath on Sun Solaris host error = device is busy
pkgrm failed to inistall PowerPath on Sun Solaris
Error Power Path Pseudos busy or mounted. Stop all I/Os and make sure all volumes are not mounted, then retry removing the package.
Cannot uninstall PowerPath on Sun Solaris host error = device is busy
pkgrm failed to inistall PowerPath on Sun Solaris
Error Power Path Pseudos busy or mounted. Stop all I/Os and make sure all volumes are not mounted, then retry removing the package.
原因
----------------------------------------------------------------
* EMCpower Removal:
* Error: PowerPath pseudo(s) still in-use, busy or mounted.
* Please stop all I/Os and make sure all volumes are
* not mounted then retry removing the package.
----------------------------------------------------------------
pkgrm: ERROR: preremove script did not complete successfully
Removal of <EMCpower> failed.
* EMCpower Removal:
* Error: PowerPath pseudo(s) still in-use, busy or mounted.
* Please stop all I/Os and make sure all volumes are
* not mounted then retry removing the package.
----------------------------------------------------------------
pkgrm: ERROR: preremove script did not complete successfully
Removal of <EMCpower> failed.
解决方案
1.
Check if the pseud devices are still mounted. If so umount them and try the uninstall of PowerPath..
If still the issue there -
2.
Check with "fuser -c <pseudo device>" and 'fuser -ck <pseudo device>" and try the uninstall of PowerPath..
If still the issue there -
3.
If above 2 will not work, reboot the system to single user non cluster mode and try the uninstall of PowerPath.
If still the issue there -
4.
If still got the same "device busy error", please open the /etc/ system file and change line to "set emcp:bPxEnableInit=0" and reboot the host back in single suer mode. The value "0" will ensure in reboot PowerPath emcp modules will not be loaded (modinfo | grep -i emcp).
After the host come up try the unistall of PowerPath.
Check if the pseud devices are still mounted. If so umount them and try the uninstall of PowerPath..
If still the issue there -
2.
Check with "fuser -c <pseudo device>" and 'fuser -ck <pseudo device>" and try the uninstall of PowerPath..
If still the issue there -
3.
If above 2 will not work, reboot the system to single user non cluster mode and try the uninstall of PowerPath.
If still the issue there -
4.
If still got the same "device busy error", please open the /etc/ system file and change line to "set emcp:bPxEnableInit=0" and reboot the host back in single suer mode. The value "0" will ensure in reboot PowerPath emcp modules will not be loaded (modinfo | grep -i emcp).
After the host come up try the unistall of PowerPath.
其他信息
Before editing the /etc/system file please have a copy of the original file.
受影响的产品
PowerPath for Solaris产品
PowerPath for Solaris文章属性
文章编号: 000064215
文章类型: Solution
上次修改时间: 14 8月 2025
版本: 5
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。