How to Run WSDeactivate on Dell Encryption Enterprise

摘要: WSDeactivate can be run on Dell Encryption Enterprise (formerly Dell Data Protection Enterprise Edition) by following these instructions.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

说明

This article provides instructions how to run WSDeactivate on Dell Encryption Enterprise (formerly Dell Data Protection | Enterprise Edition).

Affected Products:

  • Dell Encryption Enterprise
  • Dell Data Protection | Enterprise Edition

Affected Operating Systems:

  • Windows

Acquire WSDeactivate by contacting support, then Run it. For more information, click the appropriate process.

Acquire

  1. Contact Dell Data Security support to request WSDeactivate.
    Note: For more information about how to contact Dell Data Security support, reference Dell Data Security International Support Phone Numbers.
  2. Upon receipt, right-click the file that is provided by support and then select Extract All.
  3. Right-click WSDeactivate.zip and then select Extract All.
    Extract All
  4. The extracted folder contains WSDeactivate.
    Extracted WSDeactivate

Run

WSDeactivate can be run using either the user interface (UI) or command-line interface (CLI). For more information, click the appropriate method.

  1. Open the WSDeactivate folder.
    WSDeactivate folder
  2. Double-click the appropriate version of WSDeactivate.
    Double-clicking WSDeactivate
    Note: The bit rate of the utility must match the architecture of the operating system.
    • WSDeactivate_x64 - 64-bit version
    • WSDeactivate_x86 - 32-bit version
  3. From the WSDeactivator window, click Run.
    Run
  4. The Vault Remover window is displayed. Click OK. The computer reboots.
    Reboot prompt
  1. Right-click the Windows start menu and then select Run.
    Run
  2. In the Run user interface (UI), type cmd and then press CTRL+SHIFT+ENTER to run the Command Prompt as an administrator.
    Run UI
  3. If User Account Control (UAC) is enabled, click Yes.
    User Account Control prompt
  4. From Command Prompt, run WSDeactivate with the wanted parameters.
    WSDeactivate with parameters

Parameters:

The following table displays the parameters available for WSDeactivate.

Parameters Meaning
–s Runs the utility silently, suppressing run and reboot confirmation prompts
–n No reboot, suppressing reboot after deactivation

CLI Examples:

Example #1:
WSDeactivate_x64 -s

Example #1 contains:

  • Bit: x64
  • Silent install = Yes
  • Reboot = Yes
Example #2:
WSDeactivate_x86 -s -n

Example #2 contains:

  • Bit: x32
  • Silent install = Yes
  • Reboot = No

Other resources: Dell Encryption Documentation - Dell Encryption WSDeactivate Usage Guide

To contact support, reference Dell Data Security International Support Phone Numbers.
Go to TechDirect to generate a technical support request online.
For additional insights and resources, join the Dell Security Community Forum.

受影响的产品

Dell Encryption
文章属性
文章编号: 000126182
文章类型: How To
上次修改时间: 18 12月 2024
版本:  12
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。