PowerStore: Data Path Alerts
摘要: This article discusses about Data Path alerts.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
When Dell PowerStore encounters a problem, an error alert is generated to help identify the issue. This article explains the different possible causes and the relevant solutions for these error alerts. If your problem is not resolved despite the solution provided, check the technical support contact options.
Note: Cannot find the information you need? Let us know using the feedback form at the bottom of this article.
Note: Cannot find the information you need? Let us know using the feedback form at the bottom of this article.
原因
The cause is mentioned in the Resolution section under respective alerts.
解决方案
| Title | User Tier offline in PowerStore |
| Alert ID | DATA_PATH_USER_TIER_OFFLINE |
| Description | A PowerStore appliance only tolerates a single drive failure in the same RAID resiliency group within a certain time if RAID 5. If another drive in the same RAID resiliency group fails, while the RAID rebuilds following the first drive failure is still in progress, the second drive failure results in PowerStore Data Path going offline.  Note: For resolution of Alert ID DATA_PATH_LOG_DATA_TIER_OFFLINE(0x00200401), see KB PowerStore Alerts: Capacity Utilization. |
| Error Code | (0x00200301) |
| Resolution | Cause A second drive fault in the same RAID 5 resiliency group, while RAID rebuilds following the first drive fault is in progress. Solution Contact Technical Support for assistance.  Note: Avoid performing any changes to the system (do not touch the drives nor attempt recovery on your own) |
| Title | Appliance Read Only in PowerStore - V1.0 and recovery process |
| Alert ID | DATA_PATH_APPLIANCE_READ_ONLY_ENTER |
| Description | A PowerStore appliance detects corruption during the user data flush after attempt to inline recovery. The corruption limits the user data flush from making progress. User reads will be allowed, but writes will be disabled. Appliance transitions to Read-Only state. |
| Error Code | (0x00201301) |
| Resolution | Cause During user data flush of dirty pages from Log, if Mapper detects a metadata corruption after FUA attempt to recover data, the corruption limits the user data flush from progressing. User reads will be allowed, but writes will be disabled. PowerStore Data Path has to transition to a read-only state to reject any new incoming Write IOs. Solution Contact Technical Support for assistance. |
受影响的产品
PowerStore文章属性
文章编号: 000130199
文章类型: Solution
上次修改时间: 21 4月 2024
版本: 6
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。