Troubleshooting Headphone or Microphone Jack Issues on a Latitude and OptiPlex Systems

摘要: This article provides the information about how to resolve headphone or microphone jack issues on a Dell Latitude and OptiPlex computer.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。

说明

Using a headphone/microphone on a OptiPlex

By design, when a headphone or headset is connected to the audio port on the front panel, the rear audio port is disabled. This allows for private audio using headphones, and the rear jack is enabled when the headphones are disconnected.

Using a headphone/microphone on a Latitude laptop

The two most common types of connectors for audio jacks are a two ring (three conductor) connector and a three ring (four conductor) or Tip, Ring, Ring Sleeve (TRRS) connector. The difference between the two can be seen in the image below.

TRSS connector
Figure 1: Example of two different types of headphone or microphone connectors

Most Latitude laptops have a microphone/headphone combo jack. Headsets with a three-ring TRRS connector support both audio playback and recording using the microphone on the headset. The E-series docking stations have a separate headphone and microphone port. This setup requires a headset that supports a two-ring connector, one each for headphone and microphone.

In order to use a headset/microphone combo device on the Latitude laptops, you must disable the internal microphone in Windows sound properties.

  1. Press Windows + Q to open the search panel.
  2. Type control panel and press Enter.
  3. In the Control Panel, click Hardware and Sound, and then click Sound.
  4. Select the Recording tab.
  5. Recording tab
    Figure 2: Screenshot of audio properties in Windows

  6. Choose the Microphone Array on the IDT High Definition Audio CODEC device.
  7. Click Properties to open the Microphone Array Properties window.
  8. From the General tab, use the dropdown menu and choose Don't use this device (disable).

    Microphone Array
    Figure 3: Screenshot of microphone array properties in Windows

  9. Click Apply.
  10. Click OK to exit the Microphone Array Properties window.
  11. Click OK to exit the Sound properties window.

If the issue persists, check our these guides:

受影响的产品

OptiPlex, Latitude
文章属性
文章编号: 000137382
文章类型: How To
上次修改时间: 25 6月 2025
版本:  14
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。