Isilon：在認可 OneFS 8.2 升級後，Smartconnect 服務 IP 位址 （SSIP） 在所有已設定的 VLAN 介面上遺失

摘要: 本文說明升級至 8.2 時，任何以 VLAN 設定的介面上遺失 SSIP 的事件。

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

在認可升級到 OneFS 8.2 時，Smartconnect 服務 IP 位址 （SSIP） 將不再適用于任何已配置 VLAN 標記的介面的區功能變數名稱稱查詢和負載平衡。
注意：針對任何以 SSIP 和 VLAN 標記設定的子網，此問題並不適用。  此外，這不適用於任何其他升級類型或版本。  此功能僅適用于升級至 8.2 時。
若要說明此問題，內部重制會反映問題如何觸發，以及需要哪些條件 -
>> 我們可以看到 SSIP 存在於所有介面（169.168.1.9、169.168.10.9、169.168.20.9）： 
MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=507bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 parent interface: bxe0
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 parent interface: bxe0        
>> 開始升級至 8.2.0.0： 
MN-X410-CLUS-1# uname -a
Isilon OneFS MN-X410-CLUS-1 v8.2.0.0 Isilon OneFS v8.2.0.0 B_8_2_0_0_011(RELEASE): 0x80200500000000B:Thu Jun 20 10:29:21 PDT 2019
    root@sea-build11-01:/b/mnt/obj/b/mnt/src/amd64.amd64/sys/IQ.amd64.release   FreeBSD clang version 3.9.1
(tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) amd64


MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 0
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 0
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan
>> 已驗證的 vlans 和 SSIP 在重新開機後建立和指派： 
MN-X410-CLUS-1# uname -a
Isilon OneFS MN-X410-CLUS-1 v8.2.0.0 Isilon OneFS v8.2.0.0 B_8_2_0_0_011(RELEASE): 0x80200500000000B:Thu Jun 20 10:29:21 PDT 2019
    root@sea-build11-01:/b/mnt/obj/b/mnt/src/amd64.amd64/sys/IQ.amd64.release   FreeBSD clang version 3.9.1
(tags/RELEASE_391/final 289601) (based on LLVM 3.9.1) amd64


MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet 169.168.10.9 netmask 0xffffff00 broadcast 169.168.10.255 zone 0
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet 169.168.20.9 netmask 0xffffff00 broadcast 169.168.20.255 zone 0
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan
>> 升級處於預先認可狀態： 
MN-X410-CLUS-1# isi upgrade view

Upgrade Status:

Current Upgrade Activity: OneFS upgrade
   Cluster Upgrade State: Ready to commit
   Upgrade Process State: Running
      Upgrade Start Time: 2019-07-13T12:38:25
      Current OS Version: 8.0.0.6_build(117)style(5)
      Upgrade OS Version: 8.2.0.0_build(11)style(5)
        Percent Complete: 100%

Nodes Progress:

     Total Cluster Nodes: 1
       Nodes On Older OS: 0
          Nodes Upgraded: 1
Nodes Transitioning/Down: 0

LNN  Progress  Version  Status 
--------------------------------
1    100%      8.2.0.0  upgraded
>> 已承諾升級： 
MN-X410-CLUS-1# isi upgrade commit
You are about to COMMIT an upgrade, it CANNOT be rolled back after this, are you sure? (yes/[no]): yes
SSIP is now missing on all vlan interfaces, however non-vlan interface is NOT affected:
MN-X410-CLUS-1# ifconfig
bxe0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
options=527bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,VLAN_HWCSUM,TSO4,TSO6,LRO,WOL_MAGIC,VLAN_HWFILTER,VLAN_HWTSO>
       ether 00:0a:f7:
       inet 169.168.1.20 netmask 0xffffff00 broadcast 169.168.1.255 zone 1
       inet 169.168.1.9 netmask 0xffffff00 broadcast 169.168.1.255 zone 0
       nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
.
.
vlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.10.20 netmask 0xffffff00 broadcast 169.168.10.255 zone 1
       inet6 fe80::20a:f7: %vlan0 prefixlen 64 scopeid 0x8 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 10 vlanpcp: 0 parent interface: bxe0
       groups: vlan
vlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
       options=303<RXCSUM,TXCSUM,TSO4,TSO6>
       ether 00:0a:f7:
       inet 169.168.20.20 netmask 0xffffff00 broadcast 169.168.20.255 zone 1
       inet6 fe80::20a:f7: %vlan1 prefixlen 64 scopeid 0x9 zone 1
       nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
       media: Ethernet autoselect (10Gbase-SR <full-duplex>)
       status: active
       vlan: 20 vlanpcp: 0 parent interface: bxe0
       groups: vlan

原因

升級至 8.2 時，flexnet 的組態檔案 （flx_config.xml） 會分割成更小、更窄的資訊。  新資料夾稱為節點資訊，每個節點的介面和狀態資訊皆可提供。  但是，在升級期間不會擷取 vlan 資訊，因此會從每個節點節點資訊檔案中排除任何 vlan 組態。  完成升級後，Smartconnect 會嘗試讀取節點資訊檔案，但無法擷取任何 vlan 詳細資料來指派 SSIP。
偵錯isi_smartconnect_d時，我們會在記錄中看到下列錯誤： 
2019-07-15-T12:46:12:DEBUG:0x80c612010:NodeInterfaceGetVlanNic_inlock():nodeinfo.c:1281: Error STATUS_NOT_FOUND (0xc0000225)
2019-07-15-T12:46:12:DEBUG:0x80c612010:NodeInterfaceIsStatus():nodeinfo.c:1385: Error STATUS_NOT_FOUND (0xc0000225)
2019-07-15-T12:46:12:DEBUG:0x80c612010:VIPLoadInterface():vip_coord.c:480: Error STATUS_NETWORK_UNREACHABLE (0xc000023c)

解决方案

此問題僅在升級至 8.2.0 時發生。此問題已在 8.2.1.0 及更新版本中修正。任何升級至 8.2.0 以上的更新版本均不受影響。  如果您懷疑您受到此問題影響，請先聯絡支援並參考此知識庫文章，然後再繼續執行下列步驟。
  1. 若要解決此問題，必須強制變更 flx_config.xml 和 nodeinfo 組態。  啟用和停用 Smartconnect 偵錯記錄即可觸發。
若要啟用偵錯記錄： 
# isi_sc_log_level -l debug
若要將記錄變更為資訊： 
# isi_sc_log_level -l info
確認 IP 位址已傳回，且程式正在執行中： 
# isi_for_array ifconfig | grep <SSIP>
# isi_for_array -s ps auwx | egrep "(smartconnect|dnsiq)" | grep -v grep
注意：重新開機精神尚未解決此問題。  精長包括isi_dnsiq_d、isi_smartconnect_d和isi_flexnet_d。

产品

Isilon Gen6, Isilon HD400, Isilon NL410, Isilon X210, Isilon X410
文章属性
文章编号: 000168627
文章类型: Solution
上次修改时间: 14 12月 2023
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。