Isilon: Node Firmware versions show in firmware status list

摘要: When 'isi upgrade cluster firmware devices' shows for all columns instead of the installed firmware versions.

本文适用于 本文不适用于 本文并非针对某种特定的产品。 本文并非包含所有产品版本。
查看其他资源

症状

isi upgrade cluster firmware devices shows the firmware version columns for all components in the cluster show <Unknown> <Unknown>.

原因

This is triggered when the installed firmware package and the OneFS version that it is installed on are incompatible. There are two active branches of Node Firmware Package: the 10.x branch, which is compatible with OneFS 8.x, and the 11.x branch, which is compatible with OneFS 9.x. Installing the wrong branch on a OneFS version it is not compatible with causes this issue to appear.

 

解决方案

First off, determine whether the wrong Node Firmware Package for your OneFS version is installed. If so, uninstall it. Then:
  • If the cluster to be updated is running OneFS 8.x, install the latest NFP 10.x version.
  • If the cluster to be updated is running OneFS 9.x, install the latest NFP 11.x version.
Both branches are equal in terms of content, and both branches are being updated with newer firmware as it becomes available. The only difference is the OneFS version compatibility.

受影响的产品

Isilon, Isilon A100, Isilon A2000, Isilon F800, Isilon F810, Isilon Gen6.5, Isilon Gen6, Isilon H400, Isilon H500, Isilon H5600, Isilon H600, Isilon HD400, Isilon S210, Isilon X210, Isilon X410, PowerScale Archive A300, PowerScale Archive A3000 , PowerScale F200, PowerScale F600, PowerScale F900, PowerScale Hybrid H700, PowerScale Hybrid H7000 ...
文章属性
文章编号: 000192587
文章类型: Solution
上次修改时间: 12 5月 2026
版本:  4
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。