Dell EMC Unity: NFSv4 export - setfacl: Operation not supported (User Correctable)
摘要: Unable to run setfacl on Unity NFSv4 export.
本文适用于
本文不适用于
本文并非针对某种特定的产品。
本文并非包含所有产品版本。
症状
When trying to issue a setfacl command on a Linux host against a file or directory in a mounted Unity NFSv4 export, the command fails:
[root@hostname xyz]# setfacl -m g:mygroup:r-x testfile setfacl: testfile: Operation not supported
原因
setfacl does not work with NFSv4.
解决方案
You need to use the nfs4-getfacl / nfs4-setfacl commands on NFSv4 mount.The setfacl does not work with NFSv4.
To make these commands available, installation of the package "nfs4-acl-tools package" is required.
Example for Debian-based distros ( Debian, Ubuntu, Linux Mint etc.):
To make these commands available, installation of the package "nfs4-acl-tools package" is required.
Example for Debian-based distros ( Debian, Ubuntu, Linux Mint etc.):
[root@hostname xyz]#apt-get install nfs4-acl-tools [root@hostname xyz]# [root@hostname xyz]#mount 192.168.1.14:/Test on /tmp/nfs type nfs4 (rw,relatime,vers=4.1,rsize=65536,wsize=65536,namlen=255,hard,proto=tcp,timeo=600,retrans=2,sec=sys,clientaddr=192.168.1.15,local_lock=none,addr=192.168.1.14) [root@hostname xyz]# [root@hostname xyz]#nfs4_setfacl -R -a A:g:10001:rW /tmp/nfs [root@hostname xyz]#nfs4_getfacl /tmp/nfs A:g:10001:rwaDtTNcCy A:g:10001:rwaDtTNcCy A:g:10001:rwaDtTNcCy A::OWNER@:rwaDxtTnNcCy A:g:GROUP@:rxtncy A::EVERYONE@:rxtncy [root@hostname xyz]#
受影响的产品
Dell EMC Unity, VNX/VNXe文章属性
文章编号: 000196295
文章类型: Solution
上次修改时间: 02 12月 2022
版本: 3
从其他戴尔用户那里查找问题的答案
支持服务
检查您的设备是否在支持服务涵盖的范围内。