Avamar: Cannot select /REPLICATE when running backend capacity report (v7.0 through 7.5)
摘要: Avamar Administrator does not allow /REPLICATE to be selected when running backend capacity report (v7.0 through 7.5).
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
The backend report is being configured through the Avamar Administrator interface.
We must choose which domains and clients should be in the report.
The expected domains are shown, but the /REPLICATE domain is not visible.
Specifying /REPLICATE when calling the backend report from the Avamar command-line results in no meaningful data is produced. Example output is shown below.
We must choose which domains and clients should be in the report.
The expected domains are shown, but the /REPLICATE domain is not visible.
Specifying /REPLICATE when calling the backend report from the Avamar command-line results in no meaningful data is produced. Example output is shown below.
nohup backendreport --include=/REPLICATE/sourceavamar.domain.com/domain/testclient.domain.com --avtar=--clearcache --avtar=--hashcachemax=-10 --small-client-mb=0 --verbose > backendreport-repl.out &
[1] 10074
admin@utility:~/working/>: tail -f backendreport-repl.out
Changing working directory to /tmp/replicate
INFO: Inclusion patterns are: "/REPLICATE/sourceavamar.domain.com/domain/testclient.domain.com"
avmgr logn
1 Request succeeded
-1 privilege level (enabled,create,read,backup,access,move,delete,maint,manage,fullmanage,noticketrequired,
superuser,ignoreacls,readdir,mclogin,opt1,opt2)
2 block type (directory)
avmgr cpdb --path=/ --mvpath=/REPLICATE/ --out=replnew.sh --avmgr-path=avmgr --failover
--list-snapups
Script "replnew.sh" for target path /REPLICATE copies 36 users in 115 accounts (81 clients)
Accounting changes: 0 differences
DONE Replicate to successful, elapsed 0000:00:08 (Wed Jan 22 09:42:18 GMT 2014)
<backendreport version="6.1.2-46" reporttime="2014/01/22-09:42:18" bytessent="0" totaltime="0">
</backendreport>
completed backendreport (pid=10074)
============================== Finished backendreport
原因
The backend report uses a standard root-to-replicate replication process to calculate its results.
Standard replication is intended to take a regular domain as its srcpath and not the /REPLICATE domain,
The backend capacity report does not accept a path containing the /REPLICATE domain.
Standard replication is intended to take a regular domain as its srcpath and not the /REPLICATE domain,
The backend capacity report does not accept a path containing the /REPLICATE domain.
解析度
The Avamar Administrator UI does not allow /REPLICATE domain to be selected for reporting purposes.
The backend report must be run on the source Avamar Administrator UI against clients under the / (root) domain.
Workaround:
It is possible to run the backend report against the /REPLICATE domain of an Avamar server by running it from the command line. See Avamar - How to run a backend capacity report on the /REPLICATE domain.
The backend report must be run on the source Avamar Administrator UI against clients under the / (root) domain.
Workaround:
It is possible to run the backend report against the /REPLICATE domain of an Avamar server by running it from the command line. See Avamar - How to run a backend capacity report on the /REPLICATE domain.
文章屬性
文章編號: 000046225
文章類型: Solution
上次修改時間: 10 2月 2025
版本: 5
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。