NVP vProxy: How to manually change the vProxy Appliance network interface settings

摘要: This KB outlines how to manually change the hostname and network settings on an NVP vProxy appliance.

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

說明

The process for changing vProxy network information is outlined in the NetWorker VMware Integration Guide, available through: https://www.dell.com/support/home/product-support/product/networker/docs

1. Open an SSH session to the vProxy appliance and authenticate with the admin account.

NOTE: If vProxy cannot be reached over SSH, launch a web console connection the vProxy from the vSphere web client.

2. Switch users to root:

sudo su -

3. Run the config_network.sh script to update the interface settings replacing the parameters with your host/network info: 

/opt/emc/vproxy/bin/config_network.sh <Interface> <FQDN> <IP Address> <Netmask> <Gateway> <DNS List (comma separated)>

Example:

nsr-vproxy01:~ # /opt/emc/vproxy/bin/config_network.sh eth0 nsr-vproxy01.amer.lan 192.168.9.151 255.255.255.0 192.168.9.1 192.168.9.100
Successfully applied new network settings
active
Restarting network services...
eth0            up
      link:     #2, state up, mtu 1500
      type:     ethernet, hwaddr 00:50:56:be:35:0c
      config:   compat:suse:/etc/sysconfig/network/ifcfg-eth0
      leases:   ipv4 static granted
      addr:     ipv4 192.168.9.151/24 [static]
      route:    ipv4 default via 192.168.9.1 proto boot
Restarting vProxy services...

nsr-vproxy01:~ # cat /etc/sysconfig/network/ifcfg-eth0
DEVICE=eth0
BOOTPROTO='static'
STARTMODE='auto'
USERCONTROL='no'
IPADDR=192.168.9.151
NETMASK=255.255.255.0

nsr-vproxy01:~ # cat /etc/resolv.conf
search amer.lan
nameserver 192.168.9.100
nsr-vproxy01:~ #

4. Reboot the vProxy Appliance:

reboot

其他資訊

受影響的產品

NetWorker

產品

NetWorker
文章屬性
文章編號: 000157759
文章類型: How To
上次修改時間: 01 4月 2025
版本:  11
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。