Powerpath: Host wordt niet weergegeven in Unisphere
摘要: Host, met PowerPath geïnstalleerd (gelicentieerd via FX Array) en met apparaten die zijn geconfigureerd op een VMAX, wordt niet weergegeven in Unisphere (niet vermeld in PMAX UnisSphere GUI's onder PowerPath Hosts)." powermt update host_registration" of het opnieuw opstarten van de host helpt niet. ...
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Omgeving:
Dell EMC SW: PowerPath (elke release) gelicentieerd via FX array
Dell EMC SW: Unisphere (elke release)
Hoewel de host apparaten heeft geconfigureerd vanaf de VMAX en correct wordt beheerd door PowrePath, wordt deze niet weergegeven in Unisphere-GUI's onder PowerPath hosts.
原因
PowerPath option misconfiguration
Checking "powermt display options", we kunnen zien:
Storage
System Class Attributes
------------ ----------
Symmetrix periodieke autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
Checking "powermt display options", we kunnen zien:
Storage
System Class Attributes
------------ ----------
Symmetrix periodieke autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
解析度
Als u de host automatisch wilt registreren in Unisphere, schakelt u de "automatische hostregistratie" in.
De volgende opdrachten lossen het probleem op:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
The change is then persistent upon reboot.
De volgende opdrachten lossen het probleem op:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
The change is then persistent upon reboot.
受影響的產品
Unisphere for VMAX, Unisphere for PowerMax產品
PowerPath文章屬性
文章編號: 000214558
文章類型: Solution
上次修改時間: 03 7月 2024
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。