PowerPath: Hostitel se nezobrazuje v nástroji Unisphere
摘要: Hostitel s nainstalovaným softwarem PowerPath (licencovaný prostřednictvím pole FX) a se zařízeními nakonfigurovanými na VMAX se nezobrazuje v nástroji Unisphere (není uveden v grafickém uživatelském rozhraní PMAX UnisSphere v části PowerPath Hosts)." powermt update host_registration" nebo restartování hostitele nepomáhá. ...
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Prostředí:
Software Dell EMC: Software PowerPath (jakákoli verze) licencovaný prostřednictvím softwaru Dell EMC array
FX: Unisphere (jakákoli verze)
Ačkoli má hostitel zařízení nakonfigurovaná z VMAX a správně spravovanou softwarem PowrePath, nezobrazuje se v grafickém uživatelském rozhraní Unisphere v části PowerPath Hosts.
原因
Možnost PowerPath misconfiguration
Checking "powermt display options", vidíme:
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
Checking "powermt display options", vidíme:
Storage
System Class Attributes
------------ ----------
Symmetrix periodic autorestore = on
reactive autorestore = on
status = managed
proximity based autostandby = on
proximity based autostandby threshold = default
auto host registration = disabled
autopath mask counter = enabled
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled device in use to array report = enabled
解析度
Chcete-li získat hostitele automaticky registrovaný v unisphere, povolte "automatickou registraci hostitele".
Problém řeší následující příkazy:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
Změna je po restartování trvalá.
Problém řeší následující příkazy:
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
Změna je po restartování trvalá.
受影響的產品
Unisphere for VMAX, Unisphere for PowerMax產品
PowerPath文章屬性
文章編號: 000214558
文章類型: Solution
上次修改時間: 03 7月 2024
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。