PowerPath : Host is not showing up in Unisphere

摘要: Host, with PowerPath installed (licensed through FX Array) and with devices configured on a VMAX, is not showing up in Unisphere (not listed in PMAX UnisSphere GUIs under PowerPath Hosts)."powermt update host_registration" or host reboot doesn't help. ...

本文章適用於 本文章不適用於 本文無關於任何特定產品。 本文未識別所有產品版本。
查看其他資源

症狀

Environment :
Dell EMC SW : PowerPath (any release) licensed through FX array
Dell EMC SW : Unisphere (any release)

Although the host has devices configured from the VMAX and correctly managed by PowrePath, it is not showing up in Unisphere GUIs under PowerPath Hosts.

原因

PowerPath option misconfiguration

Checking "powermt display options", we can see :

    Storage
    System Class  Attributes
    ------------  ----------

    Symmetrix     periodic autorestore = on
                  reactive autorestore = on
                  status = managed
                  proximity based autostandby = on
                  proximity based autostandby threshold = default
                  auto host registration = disabled
                  autopath mask counter = enabled
                  autopath array controlled counter = enabled
                  device to array performance report = enabled
                  device in use to array report = enabled 

解析度

To get the host automatically registered within Unisphere, enable the "auto host registration".

The following commands are fixing the issue :

# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration

The change is then persistent upon reboot.

受影響的產品

Unisphere for VMAX, Unisphere for PowerMax

產品

PowerPath
文章屬性
文章編號: 000214558
文章類型: Solution
上次修改時間: 03 7月 2024
版本:  4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。