Powerpath: L'host non viene visualizzato in Unisphere
摘要: L'host, con PowerPath installato (concesso in licenza tramite array FX) e con dispositivi configurati su un VMAX, non viene visualizzato in Unisphere (non elencato nelle GUI di PMAX UnisSphere in Host PowerPath)." powermt update host_registration" o il riavvio dell'host non aiuta. ...
本文章適用於
本文章不適用於
本文無關於任何特定產品。
本文未識別所有產品版本。
症狀
Ambiente:
SOFTWARE Dell EMC: PowerPath (qualsiasi versione) concesso in licenza tramite array
FX Software Dell EMC: Unisphere (qualsiasi versione)
Sebbene l'host disponga di device configurati da VMAX e gestiti correttamente da PowrePath, non viene visualizzato nelle GUI di Unisphere in Host PowerPath.
原因
Controllo errato della configurazione dell'opzione
PowerPath "powermt display options", è possibile vedere:
Attributi
della classe di sistema di storage
------------ ----------
l'archivio automatico periodico di Symmetrix = su
archivio automatico reattivo =
sullo stato = autostandby basato sulla prossimità gestita
= soglia autostandby basata sulla
prossimità =registrazione host automatica predefinita
= disabilitato
contatore della maschera di autopathing = abilitato
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled
PowerPath "powermt display options", è possibile vedere:
Attributi
della classe di sistema di storage
------------ ----------
l'archivio automatico periodico di Symmetrix = su
archivio automatico reattivo =
sullo stato = autostandby basato sulla prossimità gestita
= soglia autostandby basata sulla
prossimità =registrazione host automatica predefinita
= disabilitato
contatore della maschera di autopathing = abilitato
autopath array controlled counter = enabled
device to array performance report = enabled
device in use to array report = enabled
解析度
Per ottenere la registrazione automatica dell'host all'interno di Unisphere, abilitare la "registrazione host automatica".
I seguenti comandi consentono di risolvere il problema :
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
la modifica è persistente al riavvio.
I seguenti comandi consentono di risolvere il problema :
# powermt set auto_host_registration=on class=symm
# powermt save
# powermt update host_registration
la modifica è persistente al riavvio.
受影響的產品
Unisphere for VMAX, Unisphere for PowerMax產品
PowerPath文章屬性
文章編號: 000214558
文章類型: Solution
上次修改時間: 03 7月 2024
版本: 4
向其他 Dell 使用者尋求您問題的答案
支援服務
檢查您的裝置是否在支援服務的涵蓋範圍內。