Alienware Aurora R13 Setup and Specifications
Storage
This section lists the storage options on your Alienware Aurora R13.
Your Alienware Aurora R13 supports one of the following storage configurations:
- Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives
- Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives + one 3.5-inch hard drive or 2.5-inch hard drive
- Up to two M.2 2230 or M.2 2280 PCIe NVMe solid-state drives + one 3.5-inch hard drive + one 2.5-inch hard drive
NOTE: Your Alienware Aurora R13 comes shipped with one 3.5-inch hard drive. When installing an additional 2.5-inch hard drive, contact Dell.com technical support to purchase an additional SATA cable to connect the 2.5-inch drive to the system board.
The primary drive of your Alienware Aurora R13 varies with the storage configuration. For computers:
- With a M.2 drive, the M.2 drive is the primary drive.
- With a M.2 drive and one 3.5-inch hard drive, the M.2 drive is the primary drive.
| Storage type | Interface type | Capacity |
|---|---|---|
|
One M.2 2230 solid-state drive |
PCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps |
Up to 256 GB |
|
One M.2 2280 solid-state drive |
PCIe Gen3/Gen4 x4 NVMe, up to 64 Gbps |
Up to 2 TB |
|
One 3.5-inch hard drive |
SATA AHCI 6 Gbps |
Up to 2 TB |
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \