- Notes, Cautions, and Warnings
- Working on Your Computer
- Removing and
Installing Components
- Recommended Tools
- Removing the Cover
- Installing the Cover
- Removing the Intrusion Switch
- Installing the Intrusion Switch
- Removing the Wireless Local Area Network (WLAN) Card
- Installing the Wireless Local Area Network (WLAN) Card
- Removing the Front Bezel
- Installing the Front Bezel
- Removing the Expansion Card
- Installing the Expansion Card
- Memory Module Guidelines
- Removing the Memory
- Installing the Memory
- Removing the Coin-Cell Battery
- Installing the Coin-Cell Battery
- Removing the Hard Drive
- Installing the Hard Drive
- Removing the Optical Drive
- Installing the Optical Drive
- Removing the Speaker
- Installing the Speaker
- Removing the Power Supply
- Installing the Power Supply
- Removing the Heat Sink Assembly
- Installing the Heat Sink Assembly
- Removing the Processor
- Installing the Processor
- Removing the System Fan
- Installing the System Fan
- Removing the Thermal Sensor
- Installing the Thermal Sensor
- Removing the Power Switch
- Installing the Power Switch
- Removing the Input/Output (I/O) Panel
- Installing the Input/Output (I/O) Panel
- Removing the System Board
- System Board Components
- Installing the System Board
- Using The System Setup Program And Boot Manager
- Specifications
- Contacting Dell
Dell Precision T1700 Mini-Tower Owner's Manual
Removing the Input/Output (I/O) Panel
- Disconnect the I/O panel, data, and USB data cables from
the system board.
- Unthread and release the I/O Panel, data cable and USB
data cable from the clip on the computer.
- Slide the I/O panel towards the left of the computer to
release it and pull the I/O panel along with its cable out of the
computer.
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Zadejte hodnocení (1 až 5 hvězdiček).
Vyberte, zda vám článek pomohl či nikoli.
Komentáře nesmí obsahovat tyto speciální znaky: <>() \