- Notes, Cautions, and Warnings
- Overview
- Installation
and Quick Start
- Information Prerequisites
- Installing Active
System Manager
- Deployment Prerequisites
- Prerequisites for M1000e (with MXL), S5000, and Compellent
- Prerequisites for Rack Server, S5000, and Compellent
- Prerequisites for M1000e (with MXL), S5000, Brocade, and Compellent
- Prerequisites for Rack Server, S5000, Brocade and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, and Compellent
- Prerequisites for Rack Server, Cisco Nexus, and Compellent
- Prerequisites for M1000e (with MXL), Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for Rack Server, Cisco Nexus, Brocade, and Dell Compellent
- Prerequisites for M1000e (with MXL and FC FlexIOM), Brocade, and Dell Compellent
- System Center Virtual Machine Manager (SCVMM) Prerequisites
- Deploying ASM from VMware vSphere Client
- Deploying ASM using SCVMM
- Deploying ASM on Hyper-V host
- Rectifying mounting errors during Hyper–V deployment
- Configuring ASM Virtual Appliance
- Customizing Virtual Machine Templates for VMware and Hyper-V
- Configuring ASM Virtual Appliance for NetApp Storage Support
- Completing Initial Configuration
- Installing Windows ADK 8.1.1 for OS Prep for Windows
- Configuring DHCP or PXE on External Servers
Velkommen
Dell-websteder
Dell-websteder
Velkommen hos Dell
Min konto
- Afgiv ordrer hurtigt og nemt
- Se ordrer og spor status for din forsendelse
- Opret og få adgang til en liste med dine produkter
- Administrer dine Dell EMC-websteder, -produkter og -kontaktpersoner på produktniveau ved hjælp af Company Administration (Virksomhedsadministration).
Active System Manager Release 8.1.1 Installation Guide
Configuring Virtual Appliance with Two NICS
When PXE network
is not routable and accessible from ASM Virtual Appliance, then you
need to add a separate NIC the ASM Virtual Appliance.
Follow the steps below to add the new network adapter with ASM virtual appliance.
- In VMware vSphere, select the Virtual Appliance and select “Power Off”.
- Select Virtual Appliance and select “Edit Settings”.
- Select “Add” in the properties page and choose “Ethernet Adapter”. Select Adapter Type as “VMXNET3”.
- Select the PXE port-group name that needs to be associated with the new network.
- Select “Next” and then “OK” to ensure that the settings are updated on the Virtual Appliance
- Assign static IP address on the new network using the steps provided in section “Configuring Static IP Address in the Virtual Appliance”.
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv vurderinger (1-5 stjerner).
Angiv, om artiklen var nyttig eller ej.
Kommentarer må ikke indeholde følgende specialtegn: <>()\