Gå til hovedindhold
Log af

Velkommen hos Dell

Min konto
  • Afgiv ordrer hurtigt og nemt
  • Se ordrer og spor status for din forsendelse
  • Opret og få adgang til en liste med dine produkter
Log på Opret en konto Log på Premier Log på Partnerprogram
Kontakt os

Dine Dell.com-kurve

Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s User's Guide

PDF

Overview

The Dell Chassis Management Controller (CMC) for Dell EMC PowerEdge FX2/FX2s is a Systems Management hardware and software solution for managing the PowerEdge FX2/FX2s chassis. The CMC has its own microprocessor and memory and is powered by the modular chassis into which it is plugged.

The CMC enables an IT administrator to:
  • View inventory.
  • Perform configuration and monitoring tasks.
  • Remotely turn on and turn off chassis and servers.
  • Enable alerts for events on servers and components in the server module.
  • View the PCIe mapping information and reassign PCIe slots.
  • Provide a one–many management interface to the iDRACs and I/O modules in the chassis.
The CMC provides multiple System Management functions for servers. Power and thermal management are the primary functions of CMC, which are listed as follows:
  • Enclosure-level real-time automatic power and thermal management.
    • The CMC reports real-time power consumption, which includes logging high and low points with a time stamp.
    • The CMC supports setting an optional enclosure maximum power limit (System Input Power Cap), which alerts and takes actions such as limiting the power consumption of servers, and/or preventing the turning on of new servers to keep the enclosure under the defined maximum power limit.
    • The CMC monitors and automatically controls the functions of cooling fans based on actual ambient and internal temperature measurements.
    • The CMC provides comprehensive enclosure inventory and status or error reporting.
  • The CMC provides a mechanism for centralized configuration of the:
    • Network and security setting of the PowerEdge FX2/FX2s enclosure.
    • Power redundancy and power ceiling settings.
    • I/O switch and iDRAC network settings.
    • First boot device on the server module.
    • I/O fabric consistency checks between the I/O module and servers. CMC also disables components, if necessary, to protect the system hardware.
    • User access security.
    • PCIe slots.

You can configure CMC to send email alerts or SNMP trap alerts for warnings or errors such as temperature, hardware misconfiguration, power outage, and fan speed.

  • NOTE: The terms “storage sled” and “storage module” are used interchangeably in this document.

Bedøm indholdet

Nøjagtig
Nyttig
Nemt at forstå
Var denne artikel nyttig?
0/3000 characters
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv vurderinger (1-5 stjerner).
  Angiv, om artiklen var nyttig eller ej.
  Kommentarer må ikke indeholde følgende specialtegn: <>()\