Skip to main content
Sign Out

Welcome to Dell

My Account
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.
Sign In Create an Account Premier Sign In Partner Program Sign In
Contact Us

Your Dell.com Carts

Aurora R7 Service Manual

PDF

Procedure

  1. Place the U.2 solid-state drive in the hard-drive carrier and align the tabs on the carrier with the slots on the U.2 solid-state drive.
    Figure 1. Assembling the U.2 solid-state drive
    1. hard-drive carrier
    2. fan cable
    3. U.2 solid-state drive
  2. Slide the fan cable and the data and power cable through the power-supply unit cage.
  3. Connect the fan cable to the system board.
  4. Connect the power cable to the power-supply unit.
  5. Connect the data cable to the connector on the solid-state drive adapter.
  6. Slide the solid-state drive adapter to the solid-state drive slot and replace the screw that secures the solid-state drive adapter to the system board.
    Figure 2. Connecting the cablesImage: Connecting the cables
    1. solid-state drive slot
    2. screw
    3. data cable
    4. solid-state drive adapter
    5. power cable
    6. fan cable
  7. Rotate the power-supply unit cage towards the chassis until the unit snaps into place.
  8. Connect the power cable to the U.2 solid-state drive.
    Figure 3. Connecting the power cableImage: Connect the data and power cable
    1. chassis
    2. power cable

Rate this content

Accurate
Useful
Easy to understand
Was this article helpful?
0/3000 characters
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\