Dell EMC OpenManage Enterprise Version 3.5 User's Guide

Edit network properties of a deployment template

1. Click IO Pool Assignment and from the Identity Pool list, select an identity pool for the deployment template. Click Next.
2. In the Bandwidth section, edit the Minimum Bandwidth (%) and the Maximum Bandwidth (%) of the associated NICs and click Next.
   NOTE Bandwidth settings are only applicable to the partitioned NICs.
3. In the VLANs section (applicable only for the modular systems):
   1. Select an appropriate NIC Teaming option.
   2. Select the Propagate VLAN settings immediately check box, to propagate the changed VLAN settings on the associated modular-system servers immediately without the need for a server reboot. Click View Details to view the devices that would be affected.
      NOTE

      • Propagate VLAN settings immediately is implemented only if the deployment template has been already deployed.
      • Before propagating the VLAN settings, ensure that the network profiles are already created for the modular system servers in the fabric.
      • If the Propagate VLAN settings immediately check box is selected, then a job named VLAN Propagation is created to apply the changes. Status of the job can be checked on the Monitor > Jobs page.
   3. Select the Use strict checking check box to match the VLANs with like characteristics. If unselected, only VLAN name and QoS are used for matching.
      NOTE This option applies only to the modular-system sleds.
   4. Make changes to the Untagged Network and Tagged Network attributes of the associated NICs as required.
4. Click Finish to apply the changes.