Inspiron 13 5000 Service Manual

Procedure

1. Using the alignment posts, place the I/O board on the palm-rest and keyboard assembly.
2. Replace two screws (M2x2) that secure the I/O board to the palm-rest and keyboard assembly.
3. Open the latch for securing the fingerprint reader cable to the I/O board, then connect the cable to the I/O board–Optional for computers shipped with fingerprint readers.
4. Open the latch for securing the I/O-board cable to the I/O board, then connect the cable to the I/O board.
5. Close the left hinge down on to the palm-rest and keyboard assembly.
6. Replace the two screws (M2.5x4) that secure the left hinge to the palm-rest and keyboard assembly.