Inspiron 13 5000 Service Manual

Procedure

1. Align the screw holes on the system board with the screw holes on the palm-rest and keyboard assembly.
2. Replace the six screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
3. Slide the I/O-board cable into its respective connector on the system board and close the latch.
4. Slide the keyboard back-light cable into its respective connector on the system board and close the latch–Optional for computers shipped with backlit keyboards.
5. Slide the keyboard cable into its respective connector on the system board and close the latch.
6. Slide the touchpad cable into its respective connector on the system board and close the latch.
7. Connect the speaker cable from the system board.
8. Align the screw holes of the USB Type C bracket with the screw holes on the system board and palm-rest and keyboard assembly.
9. Replace the two screws (M2x5) that secure the USB Type C port bracket to the system board.
10. Connect the power-adapter port cable to the system board.
11. Connect the display cable to the system board.