Inspiron 5675 Service Manual

Procedure

1. Place the power supply on the chassis.
2. Slide the power-supply unit towards the back of the chassis until it snaps into place.
3. Align the screw holes on the power-supply unit with the screw holes on the chassis.
4. Replace the four screws (6-32UNCx6.3) that secure the power-supply unit to the chassis.
5. Route the power-supply unit cables through the routing guides on the chassis.
6. Connect the power cables to their extensions.
7. Connect the processor-power cable and system-board power cable to the system board.
8. Connect the power cables to the hard drives and optical drive.
   NOTE: For computers with graphics card, connect the power cable to the graphics card.
9. Place the computer in an upright position.