Inspiron 5675 Service Manual

Procedure

1. Align the four captive screws on the processor-cooling assembly with the slot on the system board.
2. In sequential order (as indicated on the processor-cooling assembly), tighten the captive screws that secure the processor-cooling assembly to the system board.
3. Align the tabs on the fan with the slots on the chassis and place the fan in position.
4. Replace the screw (6-32UNCx3.6) that secures the fan to the chassis.
5. Connect the processor-cooling assembly cable to the system board.
6. Place the computer in an upright position.
7. Connect the fan cable to the system board.
8. Place the computer in an upright position.