- Notes, cautions, and warnings
- About this guide
- About Dell EMC OpenManage Integration with Microsoft System Center (OMIMSSC) for System Center Operations Manager (SCOM)
- Purchase and manage OMIMSSC license
- Port information and Communication Matrix for OMIMSSC appliance
- Support Matrix
- Deploy and configure the OMIMSSC appliance
- OMIMSSC and SCOM interfaces for device management
- Enroll (register) management servers to OMIMSSC
- Tasks you can perform on the OMIMSSC Admin Portal
- Manage OMIMSSC from the SCOM console
- Discovery and monitoring of PowerEdge servers by using the licensed monitoring features of OMIMSSC
- Discover PowerEdge servers by using iDRAC WS-Man through OMIMSSC
- Discover PowerEdge servers by using the SCOM console
- Object discoveries using WS-Man
- Install SNMP services to monitor PowerEdge servers
- Monitoring PowerEdge servers and rack workstations on the SCOM console
- Discovery and monitoring of Dell EMC chassis using OMIMSSC
- Discovery and monitoring of Dell EMC Network Switches using OMIMSSC
- Manage Dell EMC devices using the OMIMSSC appliance
- View jobs in OMIMSSC Admin Portal and OpenManage Integration Dashboard
- Run tasks on the SCOM console for OMIMSSC monitoring features
- Upgrading the OMIMSSC appliance
- De-enroll (Deregister) management servers enrolled to OMIMSSC
- Remove an OMIMSSC VM
- Troubleshooting
- After deploying the OMIMSSC appliance, an IP address is not assigned to the OMIMSSC appliance
- After deploying the OMIMSSC appliance, enrollment of management servers with OMIMSSC is unsuccessful or the management packs are not successfully installed.
- Unable to start the OpenManage Integration Dashboard in the SCOM console
- Unable to connect to the OMIMSSC appliance
- Issues observed when usernames of local account and domain account match but the passwords differ
- Resolve issues in synchronizing data of Dell EMC devices with OMIMSSC
- Manually clean the SCOM console that is unreachable during the de-enrollment
- Connection is unavailable between OMIMSSC and the SCOM console
- Unable to log in to the OMIMSSC Admin portal by using the Mozilla Firefox browser
- A job run on OMIMSSC to discover a device stays in the Progress state for more than five hours
- Unable to discover and monitor devices after restarting OMIMSSC
- Event ID 33333: Data Access Layer rejected retry on SqlError
- Resolve issues in the Dell EMC Feature Management Dashboard
- Reference topics
- Monitoring features supported by OMIMSSC
- Configuring the monitoring features of OMIMSSC by using the Feature Management Dashboard
- Import monitoring features using the Dell EMC Feature Management Dashboard
- Upgrade monitoring features using the Dell EMC Feature Management Dashboard
- Customizing monitoring features using the Feature Management Dashboard for scalable and detailed editions
- Remove monitoring features using the Dell EMC Feature Management Dashboard
- Severity levels of discovered devices
- Key features of licensed monitoring of PowerEdge servers in OMIMSSC
- Hardware components of servers and rack workstations monitored by OMIMSSC
- Hardware components of chassis monitored by OMIMSSC
- Hardware components of network switches monitored by OMIMSSC
- View options provided by the OMIMSSC monitoring features
- OMIMSSC Unit Monitors
- Event rules used by different monitoring features of OMIMSSC
- Additional resources
- Accessing support content from the Dell EMC support site
- Contacting Dell Technologies
- Glossary
- Additional topics
Dell EMC OpenManage Integration Version 7.2 with Microsoft System Center for System Center Operations Manager User's Guide
Support Matrix
Before deploying and setting up the OMIMSSC appliance, ensure that the following software and hardware requirements are met.
| Supported software and hardware | Requirements and versions | |||
|---|---|---|---|---|
| Microsoft System Center—Operations Manager (SCOM) | One of the following SCOM build numbers must be already installed on the management server:
NOTE On systems running the Nano server version of Windows Server 2016 operating system, apply the
Update Rollup 1 for Microsoft System Center 2016 - Operations Manager agent package that is provided in the Microsoft knowledge base article KB3190029. For more information, see
https://support.microsoft.com/en-us/help/3190029/update-rollup-1.
You can upgrade to the latest versions of SCOM from previous versions as per Microsoft guidelines. For information about the supported upgrade scenarios, see the Microsoft System Center documentation. |
|||
| Microsoft Hyper-V Manager |
|
|||
| VMware ESXi | 6.5, 6.7, or 7.0 | |||
| Browsers | To start the OMIMSSC Admin Portal, you must use one of the following browsers:
|
|||
| Windows requirements for deploying OMIMSSC on the Management Server with the SCOM console |
|
|||
| RAM for the OMIMSSC appliance | Minimum of 8 GB | |||
| Processor cores for the OMIMSSC appliance | 4
The CPU cores are configured by default when the OMIMSSC appliance is deployed by using the OVA format. When using the VHD format, you must configure the CPU cores for the VM during the deployment process. |
|||
| Hard drive on the system where the OMIMSSC appliance VM gets deployed. | Minimum of 40 GB | |||
| OMIMMSC features | ||||
| Management Server (MS) requirements | - | |||
| Operating systems |
|
|||
| Managed System requirements | - | |||
| Dell EMC Server and Rack Workstation Monitoring (Licensed) | iDRAC9-based PowerEdge servers with Lifecycle Controller | Firmware version 4.20.20.20 and earlier versions | ||
| iDRAC8-based PowerEdge 13th generation servers with Lifecycle Controller | Firmware version 2.xx.xx.xx | |||
| iDRAC7-based PowerEdge 12th generation servers | Firmware version 1.6x.6x and 2.xx.xx.xx | |||
| iDRAC Service Module (iSM) Monitoring Feature | iSM for iDRAC9-based and 13th generation of PowerEdge servers | 3.5.1 and 3.4.0 | ||
| Dell EMC Chassis Monitoring Feature | Dell EMC PowerEdge FX2/FX2s | Firmware versions 2.21 and 2.20 | ||
| Dell EMC PowerEdge VRTX | Firmware versions 3.21 and 3.20 | |||
| Dell EMC PowerEdge M1000e | Firmware versions 6.21 and 6.20 | |||
| OpenManage Enterprise—Modular Monitoring Feature | Dell EMC PowerEdge MX7000 | Firmware versions 1.10.20 and 1.10.10 | ||
| DRAC Monitoring Feature | iDRAC8 with Lifecycle Controller Modular and Monolithic | Firmware version 2.xx.xx.xx | ||
| iDRAC7 Modular and Monolithic | Firmware versions 2.xx.xx.xx and 1.6x.6x | |||
| iDRAC6 Monolithic | Firmware versions 2.92 and 2.85 | |||
| iDRAC6 Modular | Firmware versions 3.80 and 3.65 | |||
| Dell EMC Network Switch Monitoring Feature | N Series of network switches | Firmware versions 6.6.xx.xx and 6.5.xx.xx | ||
| M, S, and Z Series of network switches | Firmware versions 9.14.xx.xx and 9.13.xx.xx | |||
Chassis Modular Server Correlation Feature
The Chassis Modular Server Correlation feature is used for correlation of Chassis slots with its Modular blades. Modular blades could be discovered either through the Server and Rack Workstation Monitoring feature or the Server and Rack Workstation Monitoring (Licensed) feature. For the supported Dell EMC Chassis, iDRAC, iSM, and OMSA versions, see the respective supported firmware versions section.
NOTE For using proxy management server on OMIMSSC, see the
Scalability with Dell EMC OpenManage Integration with Microsoft System Center (OMIMSSC) for System Center Operations Manager (SCOM) technical white paper on the support site. Also see
www.docs.microsoft.com.
NOTE OMIMSSC supports the enrollment of one management group through the enrollment of any of the management servers within the group.
NOTE For Gateway servers, iDRAC should be reachable from the OMIMSSC appliance to discover devices.
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\