Install SNMP services to monitor PowerEdge servers
NOTE To receive SNMP alerts from devices that are discovered through the iDRAC access using Host operating system feature, you must install SNMP services on the Managed Node and also set the Management Server IP address as the trap destination in the SNMP Services.
To install SNMP services on the Managed Node, perform the following actions:
Click
Server Manager > Roles and Features > Features.
Install SNMP Services.
From the list of available services, right-click
SNMP Services and select
Properties.
In the
SNMP Services Properties (Local Computer) window, click the
Traps tab.
Set a Community string in the
Community name box, and then enter the Management Server IP address in the
Trap Destinations box.
Click
OK.
The SNMP traps for the node that is discovered through iSM using the iDRAC access using Host operating system (Experimental) method are received. The
Severity levels of discovered devices indicates the health of the PowerEdge Servers on the network. It includes monitoring health of modular, monolithic systems, and supported Dell Precision Racks and their components at regular intervals.
Because the system components monitored by the
Dell EMC Server and Rack Workstation Monitoring feature, which is license-free, and the
Dell EMC Server and Rack Workstation Monitoring (Licensed) feature are not the same, it is possible that the overall server health that is shown through license-free (OMSA) and licensed (iDRAC WS-Man, iDRAC access using Host operating system, or iSM–WMI) methods could be different. When you observe such issues, analyze the specific component status to resolve specific issues in the system component to bring the overall health of the server to the
OK state.
Data is not available for the Topic
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please provide ratings (1-5 stars).
Please select whether the article was helpful or not.
Comments cannot contain these special characters: <>()\