Skip to main content
  • Place orders quickly and easily
  • View orders and track your shipping status
  • Enjoy members-only rewards and discounts
  • Create and access a list of your products
  • Manage your Dell EMC sites, products, and product-level contacts using Company Administration.

Dell G15 5511 Service Manual

Removing the solid-state drive in SSD slot one

Prerequisites

  1. Follow the procedure in Before working inside your computer.
  2. Remove the base cover.

About this task

NOTE Your computer has two solid-state drive slots. The solid-state drive 1 slot is located at the bottom left corner of the system board and the solid-state drive 2 slot is located at the bottom right corner of the system board. Both slots support M.2 2230 and M.2 2280 SSDs.
NOTE For more information about Dell qualified solid-state drives supported by your computer, see Parts & Accessories at https://www.dell.com/support..
NOTE Flash (update) the BIOS before upgrading to a Gen4 solid-state drive.

The following image indicates the location of the solid-state drive that is installed in SSD slot one and provides a visual representation of the removal procedure.

Image: Removing the solid-state driveImage: Removing the solid-state drive

Steps

  1. Remove the two screws (M2x4) that secure the thermal shield to the solid-state drive and the system board.
  2. Lift the thermal shield off the palm-rest and keyboard assembly.
  3. Slide and lift the solid-state drive off the slot on the system board.

  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please provide ratings (1-5 stars).
  Please select whether the article was helpful or not.
  Comments cannot contain these special characters: <>()\